Need to know the reference of a connector [imac logicboard]

[pcardoso73]

Hi,

Does anybody know what is the refernce of the connector J601 on the logicboard of an iMac mid 2011?

Please check the picture.
Thanks in advance.

Best regards,

Pedro

[gabik111]

Re: Need to know the reference of a connector [imac logicboard]

Following schematic diagram is connected to PS. I think its return singnal and data lines from MLB to PS. Basically data line.
1. PS ON
2. SCL RC
3. ISOLATED GND
4. SDA RC
5. GND
6. BL Enable
7. BL PWM

[pcardoso73]

Re: Need to know the reference of a connector [imac logicboard]

Hi Gabik,
Thanks for your answer.
Actually what I am looking for is the connector's reference so I can replace it.

To me, MOLEX PICO-SPOX seems to be alike, but I don't know.

Any idea?
Best regards,
Pedro

[piernov]

Re: Need to know the reference of a connector [imac logicboard]

Part number is often given in the schematics. Proabably easier to find on donor boards though.

[pcardoso73]

Re: Need to know the reference of a connector [imac logicboard]

I don't have the board schematics, though. :-(

[diif]

Re: Need to know the reference of a connector [imac logicboard]

Here you go.

[pcardoso73]

Re: Need to know the reference of a connector [imac logicboard]

Thank you so much.
I guess that that reference is an Apple one, so to match it to a Molex connector should be difficult, I guess.