Software to analyze Video RAM faults on graphics cards?

[paparazzo79]

Re: Software to analyze Video RAM faults on graphics cards?

Can anyone share on some upload website 3rd part...for some reason I can't download more then 4 gigs of that part?

[paparazzo79]

Re: Software to analyze Video RAM faults on graphics cards?

For some reason I can not download 3rd part.It stucks at around 4Gb.

[paparazzo79]

Re: Software to analyze Video RAM faults on graphics cards?

Could someone explain me installation in english?

[Quochai]

Re: Software to analyze Video RAM faults on graphics cards?

If anyone is having problems with the 32GB 3.rar file then you can try download it from my google drive.

I split it the third file into 4 parts of around 8Gb each. Just download all parts to the same folder then right click on 3.part1.rar and use WinRAR to unpack it and it will reconstruct the whole file

Of course you need WinRAR installed to do this but it is free to download.

1.rar
https://drive.google.com/file/d/1eDV...ew?usp=sharing

2.rar
https://drive.google.com/file/d/1uEt...ew?usp=sharing

3.part1.rar
https://drive.google.com/file/d/1Ten...ew?usp=sharing

3.part2.rar
https://drive.google.com/file/d/1qTT...ew?usp=sharing

3.part3.rar
https://drive.google.com/file/d/1zy6...ew?usp=sharing

3.part4.rar
https://drive.google.com/file/d/1uOP...ew?usp=sharing

Hello frend,
Winrar is password protected, can anyone share information about the password?

[gsegpitd]

Re: Software to analyze Video RAM faults on graphics cards?

I have probably figured out myself.

I had different disk images, one of them a HDClone image was missing the /mods/rx570 folder and the other, a 5 partition Disgenius version, which did have this folder produced the errors i was experiencing.

I copied the /mods/* folders over and can now run the tests (almost) successfully (as my test system's bios doesn't support resizable BAR, the SAM test fails).

[gsegpitd]

Re: Software to analyze Video RAM faults on graphics cards?

I'm trying to figure out the cause for an error 43 on a Asrock Phantom gaming D Radeon RX570 8G.

As far as i am able to tell the voltage rails seem to be functioning.
The vbios has the correct md5 checksum. and has been reprogrammed from a known working card dump.

The following tests have been executed, although some fail for reasons i can't guess.

dmgg.py 256 8 ok
tserver -boardtest=memfa ok
tserver -boardtest=sitquick ok

tserver -boardtest=mba error AK751.406 (implicit declaration of pci_physfn)
tserver -boardtest=quickmfg error AK751.406 (implicit declaration of pci_physfn)
tserver -boardtest=extmfg error AK309.007PA (atombios locker not found trough toollib)


would anyone have a clue if these 2 errors would be related to the test suite or could these be hardware?

[Aliasgar Jamali]

Re: Software to analyze Video RAM faults on graphics cards?

I have tried this one and all the tools work like charm except for windows 10 4 test. did you get this one working? When i click on the windows 10 for test it throw's an error so if i click on Enter or F8 does not do anything and shows the same error page again. Is there a change in the bios setting that is required? i watched the video available and saw that he selects the IGPU from the BIOS settings and i have that selected but seams like it does not make a difference for me even if i have no graphic card installed. If i install new version of windows in the partition for windows 10 it changes the config file and the grub is lost. So i have to restore the 1.pmf to get the grub menu back again but i loose the window 10 boot again. Currently i have windows 10 installed on a separate drive and use this for testing. My current setup is RAM testing tools on one drive and windows 10 on a different drive. Can anyone shed some light if you have tried this new version and got windows 10 to work from the grub menu.

I have also found this video

https://www.youtube.com/watch?v=kY3R...91%D0%B8%D1%82

It May Help Someone to install Tserver in Drive

[nazanin]

Re: Software to analyze Video RAM faults on graphics cards?

The program name is mats.exe
https://forums.guru3d.com/threads/te...ocards.313958/

It is part of nVidia MODS: MOdular Diagnostic Software
https://docplayer.net/24603374-Mods-...-products.html

hi , i am quite new in this filed . does anyone know how i can find mods and mats diagnostic software but the latest version , 455, .. ?

[gabi200]

Re: Software to analyze Video RAM faults on graphics cards?

im suffering for the same problem tried both kings_overkill's software and the new one but both are same. İ couldnt find anything on the net. motherboard gigabyte h61m s2pv cpu i3 3220

Try an old version of disk genius, or same version from the video.

i tryed and works

[bundlestars]

Re: Software to analyze Video RAM faults on graphics cards?

I used it on 8800 GTS G80.

GTX 260 won't be supported as it is a GT200 core, however there is some support for G9x.

Perhaps I am doing something wrong. When I input the following command I get an error message "command not found".

./mats -e 10

Did you set up a normal DOS USB stick or how did you test your card?

[ktmmotocross]

Re: Software to analyze Video RAM faults on graphics cards?

guys is there a version that runs on UEFI system?. i need to diagnose laptop but there is no legacy mode option in bios

[piernov]

Re: Software to analyze Video RAM faults on graphics cards?

I used it on 8800 GTS G80.

GTX 260 won't be supported as it is a GT200 core, however there is some support for G9x.

[bundlestars]

Re: Software to analyze Video RAM faults on graphics cards?

Nvidia MODS/MATS 173.48

Does this one support the Nvidia 8 and 9 series?

If so, that would be great.

EDIT: It does not work on GTX 260 or 9800GT or 8800GT.

[piernov]

Re: Software to analyze Video RAM faults on graphics cards?

Nvidia MODS/MATS 173.48

[bundlestars]

Re: Software to analyze Video RAM faults on graphics cards?

Hello Richard. I have tested this software and do not see any advantages over the MATS USB version.

From what I understand this guy just added support for several other GPUs (AMD) of the newer generations.

I was expecting support for older GPUs, particularly the Nvidia 8 and 9 series as I have many of these iconic cards, but haven't been able to test any of them as they aren't supported.

I got the same result as with MATS USB version.

[FreedomOne]

Re: Software to analyze Video RAM faults on graphics cards?

https://anonfiles.com/Z0cak5a4y1/DiskGenius_rar

I have the solution for the error 13 invalid or unsupported executable format
The problem is that the new version of Diskgenius causes errors in the bootloader of the original files
Simply recreate the PMF files with the linked version Boot to Legacy and the error is gone

That solved the error 13 invalid or unsupported executable format for me. Thanks

[breid]

Re: Software to analyze Video RAM faults on graphics cards?

Diskgenius Version:V5.3.0.1066
https://mega.nz/file/Y6AEGLBJ#kkJOcm...mDggXpIx5qkRpQ

[breid]

Re: Software to analyze Video RAM faults on graphics cards?

here the Tserver Images
https://drive.google.com/file/d/1nRI...ifHrZQvU8/view

[breid]

Re: Software to analyze Video RAM faults on graphics cards?

or this https://file.io/OBYM6UXP4lnq
Diskgenius Version:V5.3.0.1066

[breid]

Re: Software to analyze Video RAM faults on graphics cards?

https://anonfiles.com/Z0cak5a4y1/DiskGenius_rar

I have the solution for the error 13 invalid or unsupported executable format
The problem is that the new version of Diskgenius causes errors in the bootloader of the original files
Simply recreate the PMF files with the linked version Boot to Legacy and the error is gone