Abit BP6 recap

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pfrcom
    Oldbie
    • Jun 2006
    • 1230
    • Australia
    #1

    Abit BP6 recap

    Acquired this needing some TLC - original Tayeh bulging or about to, and oversize Jamicon 1000uf 16v used for EC10 mod

    Wondering about soldering of legs at Q7 & Q9, factory rework ? - Mosfets themselves identical to Q8 & Q10
    Attached Files
    better to keep quiet and be thought a fool, than to open your mouth and remove all doubt
    Tags: None
    • pfrcom
      Oldbie
      • Jun 2006
      • 1230
      • Australia
      #2
      Re: Abit BP6 recap

      Tayeh 1500uf 6.3v replaced by Rubycon ZLH 1500uf 10v, EC10 now Nichicon HM 470uf 16v
      Attached Files
      better to keep quiet and be thought a fool, than to open your mouth and remove all doubt

        Comment

        • pfrcom
          Oldbie
          • Jun 2006
          • 1230
          • Australia
          #3
          Re: Abit BP6 recap

          And Tayeh 1000uf 10v replaced by Panasonic FL 1000uf 16v
          Attached Files
          better to keep quiet and be thought a fool, than to open your mouth and remove all doubt

            Comment

            • adz
              New Member
              • Sep 2016
              • 1
              • Australia
              #4
              Re: Abit BP6 recap

              Good to see the old girl alive and ticking again

                Comment

                • Topcat
                  The Boss Stooge
                  • Oct 2003
                  • 16956
                  • United States
                  #5
                  Re: Abit BP6 recap

                  I have 2 of these I need to redo. I have a 4x PPGA370 300A's, all guaranteed to run @ 450/100....hard to find them in this config, most are slot-1. I guess I need to get these recapped....they'd make cool retro boxes.
                  <--- Badcaps.net Founder

                  Badcaps.net Services:

                  Motherboard Repair Services
                  ----------------------------------------------
                  Badcaps.net Forum Members Folding Team
                  http://folding.stanford.edu/
                  Team : 49813
                  Join in!!
                  Team Stats

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Foetuss
                      Recap motherboards :: Abit KG7-LITE and Soltek SL-75FRN2-L
                      by Foetuss
                      Hi all

                      Hope this is in the correct place.

                      I'm planning on recapping both motherboards. I actually already ordered recplament caps for them, where I will be changing out most for poly's.
                      Could use some double checking to see if I'm not doing something stupid .

                      Pictures of the boards are attached.
                      What I will be replacing with what : (planned)

                      Soltek Golden ::
                      4 1500µF 16V 10mm (5mmL) KZG => APSG160ELL152MJ16S (Chemi-Con 1500µF 16V)
                      6 3300µF 6.3V 10mm (5mmL) KZG => APSG160ELL272MJ20S (Chemi-Con 2700µF 16V)...
                      2 Photos
                      01-18-2025, 11:44 AM
                    • momaka
                      ASUS P5GC-MX motherboard recap
                      by momaka
                      Here’s another motherboard that needed a full recap: an ASUS P5GC-MX.
                      This one was gifted to me some years ago by user Pentium 4, along with a few other goodies. It actually came in working order with no bulging or leaking caps. However, I noted there were United Chemicon KZG caps everywhere on the motherboard. The CPU VRM output (CPU V_core) was the only exception: it had only 2x KZG. The rest was 6x UCC TMV 4V 680 uF caps… which aren’t any good news either.

                      So here is what the motherboard looked like with its original caps:


                      CPU VRM area up close…...
                      01-27-2021, 11:59 PM
                    • tomalamix
                      Abit NF7-S v2 Recap - Not posting
                      by tomalamix
                      Hy everyone,

                      New around here but I've been reading a lot from several threads around here.

                      I have between hands an old Abit mobo, the NF7-S v2. It was working until a few years ago, but then started to start-up only sometimes and now doesnt start up at all.

                      The red light comes on with the PSU connected and the green light comes on too when i turn it on but no joy, it doesnt POST, no beeps, just the green led comes ON.

                      I've tried changing 5 capacitors so far, 5x Rubycoon 6.3V 3300uF that are around the CPU, no joy, same thing, no POST and green...
                      11-09-2020, 07:07 AM
                    • momaka
                      no-name Radeon 9600 XT recap and cooler
                      by momaka
                      I've been seeing a lot of cheap-looking (but not always so cheap) no-name AGP video cards on eBay for a while. They started popping up quite a bit when the market for AGP cards became more alive all of a sudden due to interest in “retro” PCs. One thing that struck me about these cheapo cards is that they almost always seem to come with garbage caps - including the abominable Sacon FZ. That aside, though, I've been wondering about the rest of the quality (or lack of?) on these cards. So I decided to satisfy my curiosity yet again.

                      This one was actually suggested to me by ChaosLegionnaire....
                      11-06-2020, 07:54 PM
                    • varunviolin007
                      Looking for someone to recap Dell XPS T450 motherboard (Live in suburbs outside of Philly)
                      by varunviolin007
                      Hi guys,

                      I’m looking for someone in the Northeast to do a full electrolytic capacitor recap on a working Dell Dimension XPS T450 motherboard (it's an Intel 440BX, Slot 1). The board runs mostly fine but is beginning to freeze after warm reboots (turns back on for 30 secs or so and then freezes up but is perfectly fine after 12 hr cool down).

                      I’d be sending just the bare motherboard (CPU, cards, bracket, battery all removed). I’m located in Chadds Ford, PA and happy to ship within the US.

                      Looking for someone experienced with older PC boards who uses...
                      07-29-2025, 11:53 PM
                    • Loading...
                    • No more items.
                    Working...