Zotac 750a Capacitors

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ThunderBob2011
    New Member
    • Oct 2011
    • 7

    #1

    Zotac 750a Capacitors

    Hi all.
    I am fairly new to replacing the capacitors on motherboards and wondered if anyone could let me know which caps i need to replace the following 3 on the board in the title.

    They show as

    Teapo (Green and Gold colored)
    1000uF
    6.3v

    SM105*c
    10/08
    A3T1


    If anyone could spec out a complete board recap that would also be great.

    Thanks
    Last edited by ThunderBob2011; 03-24-2015, 04:32 PM.
    ThunderBob
    Newbie to Badcaps Forum
  • c_hegge
    Badcaps Legend
    • Sep 2009
    • 5219
    • Australia

    #2
    Re: Zotac 750a Capacitors

    Is this your board here?
    https://www.badcaps.net/forum/attach...1&d=1427245082

    What country are you from? And where do you plan on buying your caps from? That's going to have a big bearing on what options are available to you.

    Assuimng you are in the USA, you could use these to replace the caps in question - https://www.badcaps.net/store/produc...roducts_id=131

    There appear to be some larger teapo capacitors there too, which I would recommend replacing, but I can't tell from that picture what capacitance and voltage they are.
    Attached Files
    Last edited by c_hegge; 03-24-2015, 06:59 PM.
    I love putting bad caps and flat batteries in fire and watching them explode!!

    No wonder it doesn't work! You installed the jumper wires backwards

    Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

    Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

    Comment

    • ThunderBob2011
      New Member
      • Oct 2011
      • 7

      #3
      Re: Zotac 750a Capacitors

      Thanks for the fast reply.

      I am in the USA and that does seem to be my board (except it is blue and mine is brown)

      Thanks for the info on the caps. The bigger caps are 1500uF 16v.

      Would these work?

      Thanks again
      ThunderBob
      Newbie to Badcaps Forum

      Comment

      • c_hegge
        Badcaps Legend
        • Sep 2009
        • 5219
        • Australia

        #4
        Re: Zotac 750a Capacitors

        ^
        They would, except it appears that they are out of stock. You can use these instead, though - https://www.badcaps.net/store/produc...products_id=38
        I love putting bad caps and flat batteries in fire and watching them explode!!

        No wonder it doesn't work! You installed the jumper wires backwards

        Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

        Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

        Comment

        Related Topics

        Collapse

        • sam_sam_sam
          Panasonic switching power supply daughter board has two 27uf @ 50 volt capacitors which I do not keep in stock
          by sam_sam_sam
          I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow

          This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board

          After all of...
          07-13-2024, 08:14 PM
        • Hakuu
          LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
          by Hakuu
          Hi There,

          This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

          After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

          More Details

          TV Model - LG OLED77G1PUA

          Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
          07-12-2023, 02:37 PM
        • jb_Bak
          Sony xbr-65x900c main board issues?
          by jb_Bak
          Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

          Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
          Power Board Connector that goes to Main board
          CN6401
          Pin 01 NC
          Pin 02 NC
          Pin 03 "BL_ON": 0V
          Pin 04 "N/C"
          Pin 05 "STBY 3.3V": 3.5V
          Pin 06 "GND": N/C
          Pin 07 "AC_OFF"...
          09-27-2021, 04:52 PM
        • canadaboy25
          Panasonic TC-P54VT25 No image. A or D board?
          by canadaboy25
          I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.

          The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.

          I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was...
          01-17-2021, 01:06 AM
        • fredtred
          Physically bending the T-Con board creates horizontal dotted lines on OLED55CXPUA
          by fredtred
          Hello!
          I have been trying to solve this issue the past 12 months to no avail. I have been a lurker here during that time but finally decided to post my problem and see if anybody knows a solution.

          Problem
          My tv (OLED55CXPUA) has an issue where it displays horizonal lines of dotted artifacts.

          (See Attachment 1)

          Self Diagnosing
          After a very long troubleshooting period I traced the issue to the T-Con board. If I gently flexed/bend the board I could make the display go from GOOD to BAD and vice versa. I have ruled out the connectors/wires...
          10-29-2023, 01:09 PM
        • Loading...
        • No more items.
        Working...