EasyMemory MicroATX chinesse MoBo

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • the Benninger
    Senior Member
    • Nov 2022
    • 189
    • venezulan
    #1

    EasyMemory MicroATX chinesse MoBo

    Hi Dudes have a problem with this board and I am trying to decipher what is happening to it, no USB port works they have power but you connect anything and there is no communication if someone from the forum had any indication I appreciate
    I tried to make a copy of the BIOS I couldn't fit the alligator adapter, and the place where the TSOP8 is between the front panel connector and the chipset
    Attached Files
    Tags: None
    • the Benninger
      Senior Member
      • Nov 2022
      • 189
      • venezulan
      #2
      IT WAS RESOLVED

        Comment

        Previous template Next

        Related Topics

        Collapse
        • ChaosLegionnaire
          what i went through dealing with my mobo with dead onboard sound!
          by ChaosLegionnaire
          so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

          i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
          09-13-2022, 09:02 AM
        • Cerberuska
          Mobo MSI B550-A PRO password popup
          by Cerberuska
          Hello guys,
          I have interesting problem. My MoBo MSI running on Ryzen 7 w/o graphics just good. I swapped to Ryzen 5 5600G and on the boot I stuck with screen on picture. Enter Password. I checked BIOS setting with Ryzen 7, no security is enabled, BIOS password or TPM.
          BIOS I updated to last one.
          any suggestions?
          And same thing for two different 5600G, and yes, MoBo supposed to support it.
          Thank you...
          1 Photo
          11-10-2024, 01:23 PM
        • mrsith
          Dell G3 17 3779 - no display after mobo replacement
          by mrsith
          Hi guys,

          I have a friend's Dell 3779 that came to me with severely shorted mobo. Did not manage to isolate the cause, most likely that was a bga shorted. Went for a replacement motherboard. Got one from China, apparently it's been tested prior to shipping. The mobo starts up normally but I am getting no display whatsoever.

          Tried using external monitor, but being blind I am not sure if laptops goes as far as booting to Windows, a d without it I cannot get hdmi to work. Can't see boot menu options to make sure it boots to Windows. Went ahead and did a blind bios update,...
          04-30-2023, 05:11 AM
        • Ibod
          Corsair cx600 psu & ASRock B450Pro4 mobo wont start
          by Ibod
          HI I have a PC using a Corsair cx600 psu & ASRock B450 Pro4 mother board that won't power on after a shutdown (replaced a dead drive in a raid array) Not the boot drive.

          With most things unplugged, including the 24 pin ATX connector, but not the ATX12v to cpu, I have +5.01V on the +5vsb pin 9 from the PSU. When I plug the 24 pin back in to the mobo, the +5vsb fluctuates between 1.1v & 1.9v.

          Not sure where to go from here ?

          Is the PSU at fault or is the mobo causing the problem

          Look forward to any help :-)

          If I plug the 24...
          02-08-2023, 11:00 AM
        • Felipe_Serra_83
          Dell Inspiron 14-5448 - fan turns off and mobo keeps running
          by Felipe_Serra_83
          Hi, everyone. First post of an actual repair. I'm a technician but a complete newbie with laptops.

          So I got this Dell Inspiron to play with.

          No charger, so I connected to my bench PSU.

          The laptop also didn't include: hard disk (I added one of my own for testing, see below) and wireless PCB (but I doubt this could have anything to do with this particular failure).


          ------What it did (and didn't do)------

          1) I turned it on and it powered on. Powered down in 2 seconds by itself.

          2) Removed RAM, changed slot. Same...
          04-04-2024, 12:39 PM
        • Loading...
        • No more items.
        Working...