Hey All,
I have an old EP-8rda that had bad caps on it. Replaced all the caps with Rubycons (of the same type as were replaced- 1500uF 6.3v and 2200uF 10v). The motherboard posts ok, and then goes to boot. It will begin the boot process, but then hang after it starts the boot process. For example, the OS gets stuck on the loading screen, or the CD spins up and then slows down and stops. I am wondering if anyone might have ideas or suggestions as to what might be wrong with the board or how to troubleshoot from here. I switched out RAM and CPUs to make sure that wasn't the issue, as well as HDDs and CD drives. Also, the LCD display on the mobo reads FF. Let me know if I can supply any other details.
Thanks
I have an old EP-8rda that had bad caps on it. Replaced all the caps with Rubycons (of the same type as were replaced- 1500uF 6.3v and 2200uF 10v). The motherboard posts ok, and then goes to boot. It will begin the boot process, but then hang after it starts the boot process. For example, the OS gets stuck on the loading screen, or the CD spins up and then slows down and stops. I am wondering if anyone might have ideas or suggestions as to what might be wrong with the board or how to troubleshoot from here. I switched out RAM and CPUs to make sure that wasn't the issue, as well as HDDs and CD drives. Also, the LCD display on the mobo reads FF. Let me know if I can supply any other details.
Thanks
Comment