Re: DGM 1931WS Monitor repair Shorted
Bump..
jamesfreddie
Member
Last Activity: 08-25-2023, 05:14 AM
Joined: 08-24-2012
Location: Essex
-
Re: DGM 1931WS Monitor repair Shorted
Bump..Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
Sorry for the very late reply i got cought up in repairing xbox's this week.
Thanks...Last edited by jamesfreddie; 10-26-2012, 11:10 AM.Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
I replaced the fuse and the rectifier. But the thing dosen't power at all.
I did notice that the two parts marked in the picture are shorted i don't know if that means anything or not. They are marked ground and 12v....Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
I have ordered the fuse and rectifier....Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
Hi,
The model is kbp206.
Thanks...Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
Yeah, sorry those parts where removed before when that pic was taken they have been resoldered since....Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
Do those numbers make sense?
Thanks...Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
When you say "Black Probe on A,B,C or D" where are these test points?
ThanksLeave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
Should the numbers bounce around when i test the capacitor?...Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
Here is the best picture i could get, i took it in front of a window to get the best light.
Is it good enough?
Thanks...Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
The capacitor had 0 voltage.
I then did the second thing and it read 600K.
Thanks...Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
This is going to sound like a dumb queston, but how do i check for a short?
Is there a tutorial/thread?
Thanks James...Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
So i should go ahead and replace the fuse and see what happens?...Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
The fuse was actually t2.0ah250v. It was a typo.
So would that fuse be OK now?
Do i need to remove the cap to test the restance?
Thanks JamesLeave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
If i just shorted two leads on the back of the board would that fuse have blown?
Would the replacement fuse i put in my last post be sutiable?...Leave a comment:
-
Re: DGM 1931WS Monitor repair Shorted
I have just checked the fuse in the photo and it is open i would assume it has blown due to the board being shorted?
Hopefully the fuse has protected the circuit and i will just be able to replace it?
The fuse says t4.0ah250v
Would this be a suitable replacement? [url]http://uk.farnell.com/multicomp/mst-2a-250v/fuse-radial-slow-blow-2a/dp/1566103[/url]
Please let me know.
ThanksRe: DGM 1931WS Monitor repair Shorte...e in the photoLeave a comment:
-
DGM 1931WS Monitor repair Shorted
Hi,
I recently bought a faulty 19" monitor off ebay with the view to repairing it and using it in my office as my new workbench monitor as it has DVI which i now need for PS3 repairs.
I replaced 2 of the bulged capacitors then the monitor worked fine for days so i thought it will last a fair while so i went ahead to mount it on my wall mount.
That was where it all started to go down hill.
I mounted it and plugged it in, I then heard a small pop and all my computers etc. went down the RCD, and the room fuse went. The monitor would... -
Re: Repaired bad caps on mobo, but won't boot
Take a picture of the traces on the motherboard....Leave a comment:
-
Re: Aoyue Quality?
I owned one of there hot air rework stations which blew up whithin 3 days.Leave a comment:
No activity results to display
Leave a comment: