Hi everyone, i have a TCL 40" that's stuck in the boot process,here's what happens, at first turn on you get the TCL logo after that it goes to the 4 rotating color circles, it does not go beyond this point, the color circles just keep going on, from what i've read and seen on YT apparently it's a firmware/software issue, i'm willing to try a software update via the usb method but have no luck finding a suitable site to download the correct software for my model TCL, i have tried the TCL site with no luck, so the real question is can anyone HELP point me to a reliable source i can download the appropriate firmware/software so that i can give the USB method a shot..
TCL 40S6500A - stuck in boot process
Collapse
X
Related Topics
Collapse
-
Hello All,
I have an issue with my Majority PETERHOUSE GRADUATE Internet Radio, it keeps rebooting at the boot logo Welcome screen. I have an another forum active in other website but due to lack of response I am posting the same here. I am positing a link below that has pictures including all the troubleshooting I have tried, appreciate if someone can take a look and give me any suggestions.
https://www.hifivision.com/threads/m...-screen.98243/
Troubleshooting Summary: Majority Internet Radio - Flash Chip...-
Channel: Troubleshooting Audio Equipment
-
-
by futadmytroAsus g713qm-es94 stuck on boot bios problem
sn^M4NRKD02753616E
MB- g533-6050a3250201-MB-A03
Stuck on boot after ROG logo, did not enter to bios
In flash bios , laprop boot but have video issue
orig bios...-
Channel: BIOS Requests ONLY!
06-25-2025, 08:07 AM -
-
by ivtecHi folks i installed Win10 in 1 HDD and Unbuntu 22.04 in other HDD and installed Grub manager ,it has been working fine till i installed new updates. now it wont boot and doesn't make recovery either and stuck on initramfs ,i type blkid and get this see pic attac. bellow ,althou it boot in Win10 .Any help will be apreciated ....
-
Channel: General Computer & Tech Discussion
-
-
by ProttHello fellow Badcappers,
I have a Surface Pro 7 that's turning on (CPU heating up, USB powered, LCD powered) stuck on a boot logo. BIOS should be correct (ME cleaned, worked in a different S7Pro), no shorts. Only thing that seems a bit weird is the pattern in which the SSD chip is heating up. Is that normal behaviour? Rest of the SSD is 10 degrees colder.
I have replacement SSDs, but it's quite a hassle to reball and install them, so I would like to avoid doing this step if possible.
Thank you!1 Photo -
by hinisaI'm using Xiaomi Router 4A gigabit edition as wireless repeater. It worked fine for 2 years or so, but last week, wireless started to disappear.
When I unplug/replug the power, it was working fine for a day/half a day or so until it freezes again.
After testing with different power supply adapters and concluding it wasn't the issue I finally opened the case and this was the situation:
Anyway I proceed to clean up the mess and replace all caps but unfortunately it made the situation worse. Now router can't even boot, either it freezes during...-
Channel: Troubleshooting & Designing Networks
-
- Loading...
- No more items.
Comment