MSI MS-6390 ver 1.0 bad caps

[joshnz]

Re: MSI MS-6390 ver 1.0 bad caps

I fix old pc's to sell

[yyonline]

Re: MSI MS-6390 ver 1.0 bad caps

Possible replacements for RXA:

http://nz.element14.com/rubycon/10zl...10v/dp/8126216
http://nz.element14.com/panasonic/ee...0uf/dp/1848378
http://nz.element14.com/panasonic/ee...0uf/dp/1800622

There are probably others, but any of those should work... I got tired of looking thorough the site.

[Uranium-235]

Re: MSI MS-6390 ver 1.0 bad caps

why are you replacing this crap board? I have one in my scrap pile it worked I didn't even bother using it, I just keep it aside to get the few decent caps off it that it has

[joshnz]

Re: MSI MS-6390 ver 1.0 bad caps

http://nz.element14.com/capacitors

have to be patient with their site it's damn slow.

I can also order from through my od work
http://www.jaycar.co.nz/productView....T&SUBCATID=859

[yyonline]

Re: MSI MS-6390 ver 1.0 bad caps

Okay, the RXA capacitors appear to be equivalent to UCC KZE, Rubycon ZL, Sanyo WX, and Nichicon HD in specs, not a slight upgrade as I indicated earlier. The RXA datasheet gave ripple current at 120Khz, which threw me off.

For your replacement you need:

6.3V (higher voltage is okay if the cap fits)
1000uF
995 mA ripple current (or more at 100Khz)
0.056 ohms ESR (or less)

What replacement options do you have available? Let's start there and see if we can find one that will work. What is your supplier? If the supplier is online, share a link and someone can probably point you in the direction of something that will work.

[joshnz]

Re: MSI MS-6390 ver 1.0 bad caps

8mm x 15mm

[yyonline]

Re: MSI MS-6390 ver 1.0 bad caps

The Lelon RXA datasheet doesn't list a 6.3V 1000uF capacitor in 8mm size. It's possible that size just isn't on the datasheet. What is the size of this capacitor, both in diameter and height?

RXA are low ESR, but not in the very low ESR range. What other options do you have for replacements? UCC KZE, Rubycon ZL, Sanyo WX, Nichicon HD are all slightly better than the originals as far as specs go and reliable.

[joshnz]

Re: MSI MS-6390 ver 1.0 bad caps

some where I had missed the detail of the diameter. I need to stop doing these sorts of things near sleep time lol.

so now I have re read the whole thread I see the issue with using the FM for the vcore the NH as you said is better, and cheaper I found only running a low spec cpu anyway AMD duron 1300.

The 1000uf 6.3volt caps are Lelon RXA and are 8mm some are in tight spaces so I might have to find a smaller option.

Here is a lol I put my multimeter on capacitance the one I took out is 90uf

[yyonline]

Re: MSI MS-6390 ver 1.0 bad caps

What brand/series were the original 6.3V 1000uF caps that failed? You mentioned the 2200uF were KZG, but I don't see where you mention what the 6.3V 1000uF ones are.

According to the FM datasheet, 6.3V 1000uF FM are 10mm diameter. Make sure they'll fit, as most motherboard caps of that value are 8mm diameter.

[joshnz]

Re: MSI MS-6390 ver 1.0 bad caps

The caps are not available in 1000uf in NICHICON NH series from my supplier I would have to go to Panasonic FM for them and use the NICHICON NH for the vcore caps.

[yyonline]

Re: MSI MS-6390 ver 1.0 bad caps

Hi should I go with NICHICON HN series (these are 500uf greater) for the 13x 6.3v 1000uf caps.

and NICHICON HN series to replace 6x 6.3v 2200uf kzg caps for the v core.

HN will work fine as a replacement. They have better specs than the originals. Do not change the capacitance - replace 1000uF with 1000uF, and replace 2200uF with 2200uF.

[joshnz]

Re: MSI MS-6390 ver 1.0 bad caps

Hi should I go with NICHICON HN series (these are 500uf greater) for the 13x 6.3v 1000uf caps.

and NICHICON HN series to replace 6x 6.3v 2200uf kzg caps for the v core.

[kc8adu]

Re: MSI MS-6390 ver 1.0 bad caps

as close as that is if the mfr left any empty spots you could stuff them and be better than stock.i suspect that the fm would work ok other than a bit more ripple/noise on vcore.
considering how many of these boards i have found with bad kzg only by visual inspection in cnc boxes the fm are probably ok.i use rubycon mbz.pssst the badcaps store stocks them and everything else you need.

[joshnz]

Re: MSI MS-6390 ver 1.0 bad caps

There is no diameter difference between the 6.3volt version and the 10v version only a hight difference but looking at the board won't be a issue apart from the agp slot an one of the pci slots.

on a side note i have a dvd recorder here a Sony RDR-GX380 the switch mode ps is real unstable voltages are up and down way out of the normal range so i guess the psu needs to be recapped.
this seems to be a common issue with dvd players having psu fail my sisters dvd player had a cap on the 5v rail go bad and it was putting 16v on the -12v rail one poor cap exploded.

[goodpsusearch]

Re: MSI MS-6390 ver 1.0 bad caps

Or you could raise the voltage of the FMs and get lower esr, but you may have trouble fitting them in..

[yyonline]

Re: MSI MS-6390 ver 1.0 bad caps

FM is *slightly* inferior spec-wise when dealing with the same size cap.

KZG for that value is 10x20. FM is 10x25. The extra size mostly makes up for the difference in rated specs.

For 6.3V 2200uF - KZG is 2550 ripple, 0.013 ESR, FM is 2470 ripple, 0.018 ESR.

You want your replacements to have the same or less ESR, and the same or more ripple. Therefore, FM is rated slightly less than the KZG you are replacing. Still, working FM is better than failed KZG. Will they work? Almost certainly, as they are very close although slightly inferior spec-wise. That said, if you can purchase the correct replacements, why not do so?

[joshnz]

Re: MSI MS-6390 ver 1.0 bad caps

Data sheet says 10mm diameter.

[c_hegge]

Re: MSI MS-6390 ver 1.0 bad caps

I wouldn't use FM either for a motherboard. They are a slight downgrade from KZG and they probably won't fit (ie. they may be 12.5mm diameter instead of 10mm). I'd use Rubycon MBZ and MCZ from badcpas.net

[joshnz]

Re: MSI MS-6390 ver 1.0 bad caps

Thanks for the prompt reply

[bigbeark]

Re: MSI MS-6390 ver 1.0 bad caps

Replace the KZGs with Panasonic FM. The FC series in not suited for motherboards.
Leave the Rubycons alone.