Hi, I got a Gigabyte GTX 1050 Ti that may or may not have suffered some water damage (a lot of corrosion on the shield and the ports, but not as much on the board itself, which I cleaned). The card has no shorts that I can find on any of the rails but is not detected. I have 12v, 3.3v, 5v, 1.8v, pex and Vmem, but not Vcore. However, the core do get a little hot when I turn on - not to much, I can safely touch it. Obviously no voltage on the main coils. How should I proceed? I'm not sure about the proper way to test the mosfets for shorts because of the very low resistance on that card. I've attached board file and schematics for reference as my board is a little difference revision (no external 12v connector, for example).
Comment