Hi, I got a Gigabyte GTX 1050 Ti that may or may not have suffered some water damage (a lot of corrosion on the shield and the ports, but not as much on the board itself, which I cleaned). The card has no shorts that I can find on any of the rails but is not detected. I have 12v, 3.3v, 5v, 1.8v, pex and Vmem, but not Vcore. However, the core do get a little hot when I turn on - not to much, I can safely touch it. Obviously no voltage on the main coils. How should I proceed? I'm not sure about the proper way to test the mosfets for shorts because of the very low resistance on that card. I've attached...

Re: help repairing Gigabyte gv-n105toc-4gd



Sorry for super late reply but how do i open this? donwloaded teboview and it asks for a password...

Re: Dell U2312H Repair

Hey all, got a problem with the same monitor model so just using this thread rather than a new one. When plugging mine it is recognised by the pc, the blue led turns on as well but there's no display at all. After reading this thread i checked the g1084 regulator and it works fine. All caps visually seem ok, no leaking or bulging. Naturally I suspect the led driver however.i can't seem to find it! Is it part of the main power board? (Picture at beggining of thread) i'm attaching a pic of the lcd control for reference.
I'd appreciate any help in locating...