Original firmware for Zyxel router VMG3326-D20A

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • Xenon-Codex
    Senior Member
    • Jan 2018
    • 183
    • Finland

    #1

    Original firmware for Zyxel router VMG3326-D20A

    I need the Zyxel firmware for this router, which has an operator tinkered fw.
    VMG3326-D20A is the operator model, and nothing is found from Zyxel page.
    Attached Files
    Last edited by SMDFlea; 08-18-2021, 04:40 PM.
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30978
    • Albion

    #2
    Re: Original firmware for Zyxel router

    https://openwrt.org/toh/zyxel/p-2812hnu-f1

    Comment

    Related Topics

    Collapse

    • filippia1981
      Starlink WiFi router firmware of the HR1211 IC
      by filippia1981
      Hi, I would like to ask if someone has the firmware of the HR1211 IC of the Starlink WiFi router in order to program a new IC

      The diagnosis showed that this IC is shorted and need to be replaced with the right firmware. I cannot find the firmware

      kind regards
      Ioannis Balouktsis
      06-17-2024, 11:38 AM
    • Dannyx
      Original Sonoff 4CH Pro dump (bricked firmware)
      by Dannyx
      Good day folks. A friend of mine told me his Sonoff 4CH light switch recently stopped working. It wouldn't respond to any commands and would appear as offline. Not having done any major work on these home automation devices before, we both concluded the firmware got corrupted, so we set about to find a way to reprogram it.

      It turns out these things have got a STM32 inside of it and an ESP32, so given the open-source nature of these components, there's a variety of different firmware and interfaces you can upload to them......in theory. Ideally, we wanted to use the original one...
      01-05-2021, 11:47 AM
    • gurj1979
      Ubiquiti firmware help. US-8-150W POE
      by gurj1979
      Hi guys.

      I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
      Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.

      So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
      Got New chip and writes good.

      THE PROBLEM...
      It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.

      Does anyone have a Good Firmware I can have?...
      07-22-2024, 05:13 PM
    • Document Archive
      Acer Extensa EX2540-56BF + PowerCube Original Notebook 15 Specification for Upgrade or Repair
      by Document Archive
      This specification for the Acer Extensa EX2540-56BF + PowerCube Original Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the EX2540-56BF + PowerCube Original boardview and EX2540-56BF + PowerCube Original schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer...
      09-06-2024, 08:16 AM
    • wattage
      AOC AG493UCX 49-inch monitor - Firmware request
      by wattage
      Hello Badcaps Community,

      I purchased a preowned AOC monitor that is not working and out of warranty. It was sold as not working. I am looking for guidance on self-repair. In particular, I am after the firmware for the monitor. At the end, I have included monitor model information and links to pics and vids of the issue.

      The problem is that it will not display a picture on any of its inputs. And the on-screen menu does not appear. The power button works properly. It powers on with the remote as well. But the on-screen menu does not appear, even when not connected to any...
      07-13-2025, 04:41 PM
    • Loading...
    • No more items.
    Working...