hp 19"

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hydafl
    Member
    • Jul 2009
    • 18
    #1

    hp 19"

    Just wanted to give a hardy thank you. Due to this site and the info I was able to repair our 19" monitor last night. It was a first for me. The info about the caps and the how to install was fun and not as difficult as I had thought.
    Just something good to share.
    Tags: None
    • golemmaster
      Senior Member
      • Jul 2009
      • 100
      • USA
      #2
      Re: hp 19"

      Excellent! Glad to hear it. Empowering, isn't it? Knowledge, that is.

        Comment

        • hydafl
          Member
          • Jul 2009
          • 18
          #3
          Re: hp 19"

          yes knowledge is the key. I've worked on cars for many years, and having installed new parts, I would have liked to know what was wrong with the part. a small step...

            Comment

            Previous template Next

            Related Topics

            Collapse
            • howardc64
              A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
              by howardc64
              Problem

              This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
              08-04-2024, 10:36 PM
            • japlytic
              DRIVER_PNP_WATCHDOG error re. old drivers in Windows 11 install image
              by japlytic
              In a Beelink GTR mini PC, mine has an Intel AX200NGW WLAN module.

              Tried (only with keyboard/mouse connected):
              • BIOS + database update
              • Using latest Windows 11 image built with official image creation tool
              • Previous setup version for Windows 11 installer
              • Replacing SSD without a slow block (the previous SSD had a slow block with access time > 500 mS)
              • TPM reset (worked to the point where DRIVER_PNP_WATCHDOG error message is displayed briefly after the point of stalling)
              • Disabling power to WLAN and LAN modules in BIOS (Advanced > AMD PBS > PCI Express Configuration)
              ...
              06-19-2025, 04:59 PM
            • 24gsm
              MacBook Pro A1708 install macos fail
              by 24gsm
              hi to all
              i have MacBook Pro (13-inch, 2017, Two Thunderbolt 3 ports)
              after enter to recovery and format hdd 1to .
              after try to install macos online . its frezz at loading install in boot and i waiting few hour but nothing i ty install by boot using flash disk but same issu

              can help please
              MacBook Pro (13-inch, 2017, Two Thunderbolt 3 ports)
              Serial Number: FVFXP0U0HV2J
              Config Code: HV2J
              Find My Mac: OFF
              ​...
              04-16-2025, 03:57 AM
            • duwane
              A2141 (2019 16" MB Pro) Strange macOS install issues. NAND? WIFI? FIRMWARE?
              by duwane
              Hi All.

              Sorry ahead of time for the text wall. This is a strange problem and I have tried to explain it as best I can. I realise this is a hardware forum (mostly), but I am still not sure if this is even a hardware fault! I am hoping that someone more knowledgeable than me in the area of understanding installation logs, or someone that has had a similar issue in the past may have some ideas of what might be causing this.

              The issue:
              Unable to do a clean install of any macOS versions supported for this model, even after fully erasing and formatting the internal SSD,...
              10-26-2022, 07:02 AM
            • TrumanHW
              MacOS: R|W Programmers like CH341x BINs..?
              by TrumanHW
              For years I tried figuring out how to R|W BINs from my CH341x programmer.
              From FTDI's pkg, Apps specifically claiming they work, I failed for ~8 years.

              I'd expect many here figured it out (easily), but in case not ...
              It's one of the few forms of "how-to" remuneration I can GIVE BACK.

              This group is both GENEROUS & literally BRILLIANT / GENIUS!!!


              This may be the easiest means to copy-paste:

              Code:
              SERIAL -to- USB - CH341 ROM (MacOS):


Install xcode:				xcode-select --install
Relocate
              ...
              04-08-2022, 02:33 PM
            • Loading...
            • No more items.
            Working...