I recently acquired this monitor of craigslist and was told it won't turn on. Sure enough I get it home, plug it in and nothing. No response from the power button, no signs of life whatsoever. I decided first obvious thing to do is tear the little bugger apart and look for obvious signs of damage from the power and main video boards. I see nothing out of the ordinary so this is where I am. I took a couple pictures of the power board, I also don't see anything on the board that would give a voltage pinout.
AOC 2770VH1 No power
Collapse
X
-
Tags: None
-
-
Re: AOC 2770VH1 No power
As mentioned, I don't see a pin layout to see which pin goes to what voltage. I will try to get a better picture. My only camera is my Galaxy S4. I must've jolted a bit when i took the picture. also what would the main filter cap be?. Thanks for the response.Comment
-
Re: AOC 2770VH1 No power
Check that rectangular black fuse too by that connector that goes to the main board.
https://www.badcaps.net/forum/attach...7&d=1474319488Last edited by budm; 09-19-2016, 09:45 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: AOC 2770VH1 No power
The objective right now is to find the problem board. It could be the main board, it could be the PSU. You don't need to really know what pin does what just yet. Just put the black probe of your DMM on any GND on the secondary side and probe the pins. I can read GND on that blurry picture on pic 1 near the plug. Just trace it to the plug if you want. Then you know the GND pins on that plug. The rest, plug it in with the main board attached and start to probe the DC V of the other pins.
We just want to find the STBY voltage for now, which is always on. If you get nothing, unplug the main board and probe the pins again. If you still have no STBY voltage, then there is trouble on the PSU.
The main filter capacitor is the large one laying down with the white goo on the primary side. Be careful with that one, as there can be 400V DC on there.
As budm already mentioned, check all the fuses on the PSU.Last edited by CapLeaker; 09-20-2016, 06:20 AM.Comment
-
Re: AOC 2770VH1 No power
Well this is interesting. I tested the 2 fuses on the board and both seemed ok. ( I have a pretty cheap multimeter and just ordered a better one that both is auto ranging and measures capacitance.) But when i was preparing to trace the ground. I found this bad solder joint that appears to have suffered some damage. It seems to be one of the pins on the power connector. (either positive or negative) not sure which is which. I would just reflow the solder joint, but the browning around that point concerns me. Not sure how i didn't notice it before but alas. I think we have found at least part of the problem.Comment
-
Comment
-
Re: AOC 2770VH1 No power
https://www.badcaps.net/forum/attach...7&d=1474383094
That is bad solder joint, it was arcing due to the cold joint in the beginning.
You need to resolder all 3 pin of that IEC AC inlet, it is bad design due to lack of proper support of the inlet.
Just clean off the black carbonize with Alcohol first then use flux and solder.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: AOC 2770VH1 No power
Update: I was in the middle of doing just that haha. I have since reasselbmed the monitor partially to the point I can test to see if I have power coming from the standby light and sure enough. I do. I need to finish reassembling the monitor but I do believe it is fixed.Comment
-
Comment
Related Topics
Collapse
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?by Tynan DillI was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming...7 Photos -
by PantherDaveHi all!
I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅
I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
https://www.badcaps.net/forum/troubl...-hardware-devi... -
by GLISITHi all,
TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!
I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!
A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about... -
by sam_sam_samI have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump
One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy... -
This specification for the HP Pavilion Power Pavilion Power 15-cb009nl Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Pavilion Power 15-cb009nl boardview and Pavilion Power 15-cb009nl schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...09-06-2024, 05:59 AM
- Loading...
- No more items.
Comment