Dell E177FPv - No video

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • MEB
    Badcaps Veteran
    • Sep 2013
    • 371
    • USA

    #1

    Dell E177FPv - No video

    Hello. I realize this monitor is not worth the trouble, but I can't help it.
    I got 2 of these. After recapping both PS boards, 1 works fine, the other has no video.

    Using the working one as the donor, the second monitor works fine upon substituting the video board from the working monitor. So I pretty much know (assume) it is the video board. This is only an $8 board on ebay, but I'm looking to learn something if possible. The caps on the board appear fine and are not Elites or Cap-Xons, and attempting to check ESR with old "blue" and my DVM shows also good and not shorted. I am not able to locate a fuse. I have enclosed pictures of the video board in question. I am not sure where to begin.
    Attached Files
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: Dell E177FPv - No video

    What dcV do you get on all 3 pins of U6, U7, Q5?
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • MEB
      Badcaps Veteran
      • Sep 2013
      • 371
      • USA

      #3
      Re: Dell E177FPv - No video

      Thanks budm. It is always a pleasure.

      Attached are the voltages. I wasn't sure how else to list them without confusion. Am looking forward to your reply, but it is Illinois time and am off to a tractor pull at the fair, so see you tomorrow!
      Attached Files

      Comment

      • budm
        Badcaps Legend
        • Feb 2010
        • 40746
        • USA

        #4
        Re: Dell E177FPv - No video

        The Voltages are OK.
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • MEB
          Badcaps Veteran
          • Sep 2013
          • 371
          • USA

          #5
          Re: Dell E177FPv - No video

          Back to business. Ready for more troubleshooting.
          Attached Files

          Comment

          • MEB
            Badcaps Veteran
            • Sep 2013
            • 371
            • USA

            #6
            Re: Dell E177FPv - No video

            budm, is there any more I can do?

            Comment

            • budm
              Badcaps Legend
              • Feb 2010
              • 40746
              • USA

              #7
              Re: Dell E177FPv - No video

              You will probably need to use the scope to see if there is any signals on the LVDS cables to the LCD panel, or the XTAL is active.
              BTW, does it work if you try cooling or heating the board?
              Last edited by budm; 07-28-2016, 10:17 AM.
              Never stop learning
              Basic LCD TV and Monitor troubleshooting guides.
              http://www.badcaps.net/forum/showthr...956#post305956

              Voltage Regulator (LDO) testing:
              http://www.badcaps.net/forum/showthr...999#post300999

              Inverter testing using old CFL:
              http://www.badcaps.net/forum/showthr...er+testing+cfl

              Tear down pictures : Hit the ">" Show Albums and stories" on the left side
              http://s807.photobucket.com/user/budm/library/

              TV Factory reset codes listing:
              http://www.badcaps.net/forum/showthread.php?t=24809

              Comment

              • MEB
                Badcaps Veteran
                • Sep 2013
                • 371
                • USA

                #8
                Re: Dell E177FPv - No video

                OK, went with the second suggestion first as I am not real efficient with a scope. I turned on the power, no video, heated board with heat gun as much as I thought I could get away with and no video after a few minutes. Powered it on/off a few times, still no video. Removed video board, wrapped in paper towel and put it inside a plastic bag and put in the freezer for an hour. Took it out and connected it to the rest, waited a minute or two for the moisture to disappear some and powered it up. Video came right on! But, now it won't fail even trying to heat the board with the heat gun again. I guess I will just leave it running and see what happens? Thanks for your help thus far.

                Comment

                • budm
                  Badcaps Legend
                  • Feb 2010
                  • 40746
                  • USA

                  #9
                  Re: Dell E177FPv - No video

                  You can use canned air duster upside down for cooling, I wonder if it has bad EEPROM.
                  Never stop learning
                  Basic LCD TV and Monitor troubleshooting guides.
                  http://www.badcaps.net/forum/showthr...956#post305956

                  Voltage Regulator (LDO) testing:
                  http://www.badcaps.net/forum/showthr...999#post300999

                  Inverter testing using old CFL:
                  http://www.badcaps.net/forum/showthr...er+testing+cfl

                  Tear down pictures : Hit the ">" Show Albums and stories" on the left side
                  http://s807.photobucket.com/user/budm/library/

                  TV Factory reset codes listing:
                  http://www.badcaps.net/forum/showthread.php?t=24809

                  Comment

                  • MEB
                    Badcaps Veteran
                    • Sep 2013
                    • 371
                    • USA

                    #10
                    Re: Dell E177FPv - No video

                    Thanks for the air duster info. I was kind of concerned about the frosty freezer board! It has been quite a few hours now and the darn thing is still working. I cycled power a few times and it keeps coming back with video. I will let it run overnight I guess and will try to read up on the eeprom as I don't know anything about those. It might be U1 on the board as 24LC02BT datasheet says it is an eeprom?

                    Comment

                    • MEB
                      Badcaps Veteran
                      • Sep 2013
                      • 371
                      • USA

                      #11
                      Re: Dell E177FPv - No video

                      Well, the monitor ran fine overnight. Guess I will assemble it and see how long it lasts. Thanks for your help.

                      Comment

                      Related Topics

                      Collapse

                      • m1ch43lzm
                        HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                        by m1ch43lzm
                        Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                        Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                        05-12-2025, 08:37 PM
                      • Hakuu
                        LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                        by Hakuu
                        Hi There,

                        This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                        After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                        More Details

                        TV Model - LG OLED77G1PUA

                        Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                        07-12-2023, 02:37 PM
                      • momaka
                        HannStar Hanns-G HC194d LCD monitor repair
                        by momaka
                        Normally, I never post repairs this quick after I do them, because… I am usually very slow. But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
                        03-15-2023, 10:17 PM
                      • Garret Matt.
                        DELL Latitude 5430 Rugged CORE_D5K Rev.A00 Schematic and/or Board View
                        by Garret Matt.
                        Hello,

                        I'm Working on replacing an Inductor on this Dell's board and I need to come up with a compatible replacement. As much as I would like to smash a comparable 2R2 in the same spot I'd like to confirm the specs before confirming a killed board. For my purposes I'd be happy with a second opinion on the replacement inductor or the actual schematics/board view. As this is a commonly used Dell Rugged in my local service area, schematics would greatly help in the future.

                        Thank you in advance for any assistance you can render.

                        Inductor In question. Buzzes like...
                        Today, 01:21 PM
                      • PacoGT
                        Gpu DELL OEM RTX3080 No video
                        by PacoGT
                        Hello friends, I have a question. They brought me this video card, a DELL RTX 3080. They told me that it fell and the impact no longer produced video.
                        When trying it, it's as if it wanted to give video but in the end nothing, I already checked voltages etc. everything is as it should, but without video
                        I suppose it could be a bios problem but since sometimes they don't tell you everything, I've searched for the bios everywhere but without success
                        I can't find a backup or something to try to reprogram bios and see if it's the fault, could you help me maybe someone has one that...
                        02-18-2025, 01:08 AM
                      • Loading...
                      • No more items.
                      Working...