Sharp PN-655

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • CraigR
    Badcaps Veteran
    • Dec 2013
    • 959
    • USA

    #1

    Sharp PN-655

    I have a huge Sharp PN-655 LCD monitor and it weighs a ton. What happens is I turn it on and it goes through a couple screens then off with green light flashing constantly on the front. I have a link for the video of what I see below. I did all basic checks for bulged caps or signs of heat and nothing so I though maybe a TCON??? any and all help is appreciated.

    VIDEO: http://s231.photobucket.com/user/WAL...kdbep.mp4.html
    Attached Files
  • CraigR
    Badcaps Veteran
    • Dec 2013
    • 959
    • USA

    #2
    Re: Sharp PN-655

    Anybody??

    Comment

    • CraigR
      Badcaps Veteran
      • Dec 2013
      • 959
      • USA

      #3
      Re: Sharp PN-655

      Nobody want to take a stab at this?

      Comment

      Related Topics

      Collapse

      • diamon
        Issues with new Surface Pro 5 screens
        by diamon
        I have three Microsoft Surface Pro 5 model 1796, with all cracked screens.
        Have bought from Aliexpress three new screens, the part numbers from my and the seller are the same:

        Bad working China screen part number:


        Good working own screen part number


        Error I get with the bad working China screen:


        No error with the good working own screen:



        All the three China screens (all the same exact part numbers) produce the same error in Device manager. Have also performed a clean installation...
        06-25-2023, 01:41 PM
      • advant
        Driving a Sharp TCON/panel with a universal main board
        by advant
        This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

        I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
        02-03-2020, 12:25 AM
      • sefoster
        Sharp Aquos Lc-80LE757U flashing Sharp on screen when plugged in
        by sefoster
        I have a Sharp Aquos LC-80LE757U that randomly made a loud popping noise when when watching TV one day. We found that the fuse blew and the thermistor. We ended up replacing the entire power supply board and have also replaced the TCON board. Now as soon as I plug the TV in it lights up and has the Sharp logo flashing on and off of the screen. If I unplug the ribbon cable from the TCON board to the main board I get the 2 long 5 short error code. Any ideas on where to go from here? We've tried resetting it but nothing has worked. If we plug it in and let it cycle through the flashing of the Sharp...
        11-20-2022, 09:29 AM
      • SONY_E-WASTER
        Help! Sharp LC-70UE30U 3 long flashes + 3 short flashes.
        by SONY_E-WASTER
        Hello, I'm new to this forum. I like to tinker with Sony electronics, I have been lucky trouble shooting sony stuff, But I can't find much info on this Sharp TV.

        The problem; plug to power>white led power indicator light is on>it turns on to the red Sharp logo>
        then the android logo is displayed, lit fine then the android logo brightness varies, then lit normal, then the tv restarts and does the same startup logos over and over for 5 times then it turns off and the power indicator light flashes the trouble code 3 long blinks plus 3 short blinks .

        does...
        12-26-2021, 05:46 PM
      • gavenb
        Sharp LC-80LE661U 80 inch
        by gavenb
        Hi folks!
        I have a LC-80LE661U that had some interesting issues.
        Initially, it would come on and show the sharp logo and would show normal static before shutting off.

        I started troubleshooting by disconnecting the led lighting strips and turning it on. It would do the same thing - come on, show the sharp logo and shut off. After reading, it was suggested to replace the main board. That was replaced and the same symptoms resulted. After this and some reading, the parts cannon got loaded up. I replaced the power board, same issue. Replaced the Tcon board and now it...
        11-12-2023, 02:05 PM
      • Loading...
      • No more items.
      Working...