CCFL Tubes: Any Preferred Sources in USA?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • asciiman
    New Member
    • Aug 2014
    • 7
    • United States of America

    #1

    CCFL Tubes: Any Preferred Sources in USA?

    Hi everyone-
    I was looking around the forum to see if I could find a preferred USA supplier for CCFL tubes. Price is one thing, but consistency in quality is paramount.

    Thanks for any suggestions.

    @
  • selldoor
    Slow Learner
    • Dec 2010
    • 7870

    #2
    Re: CCFL Tubes: Any Preferred Sources in USA?

    www.ccflwarehouse.com I belive they are helpful on the phone/email and have tutorials on site. They also have an ebay outlet



    Also lcdparts.net
    Last edited by selldoor; 08-17-2014, 11:27 AM.
    Please upload pictures using attachment function when ask for help on the repair
    http://www.badcaps.net/forum/showthread.php?t=39740

    Comment

    • asciiman
      New Member
      • Aug 2014
      • 7
      • United States of America

      #3
      Re: CCFL Tubes: Any Preferred Sources in USA?

      Thanks Selldoor! They are the best I have seen so far, but I am new to this and wanted to ask.

      @

      Comment

      • stj
        Great Sage 齊天大聖
        • Dec 2009
        • 31084
        • Albion

        #4
        Re: CCFL Tubes: Any Preferred Sources in USA?

        mind if i ask why you care what country the middle-man is in?
        they all come from china originally anyway.

        Comment

        • asciiman
          New Member
          • Aug 2014
          • 7
          • United States of America

          #5
          Re: CCFL Tubes: Any Preferred Sources in USA?

          Don't mind at all...

          1) Shipping costs.

          2) Not all Chinese products are of the same quality or grade

          3) It's nice to be able to pick up a phone and talk to a human being about what I want. Maybe even establish a working relationship?

          Peace.

          @

          Comment

          Related Topics

          Collapse

          • ttmi100x
            HANNSG Hi221 -- 2 secs to black feat. CCFL flicker & "burn" marks on power board
            by ttmi100x
            Greetings everyone,


            I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...


            The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
            Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.

            Upon closer inspection...
            07-31-2024, 06:36 PM
          • mikey5791
            Help on Samsung Syncmaster T220 dead ccfl lamp
            by mikey5791
            Hi,

            This monitor previously is my main working monitor which i have been using for 8~9 years. Yesterday, when i switched on my pc from fresh to power on, the monitor is just black no display. I started dismantle to look inside the monitor power board but nothing looks suspicious or burnt. So i took my external ccfl inverter to try to power the monitor ccfl lamps which consisted of 2 lamps on upper part and 2 lamps on the lower part.

            Found out the upper ccfl lamp which is supposed to connect to cn304 on the power board did not light up. Then i installed a used working...
            10-18-2020, 03:17 AM
          • Topcat
            Nihon Kohden (Tyco Electric) ET2400LM 24" Restoration
            by Topcat
            This was rescued from a recycle gaylord from a hospital along with some other things....

            I don't have to explain the significance of restoring this; 16:10 Aspect Ratio, 1920x1200; very high end Samsung LTM240CT04 panel. Add in it's blonde (will pair nice with a retro rig) and also ELO touchscreen. It is very well made, very heavy. Even used these are hard to find and expensive....but it had some problems...

            Problem one, the external PSU was missing. I found one in my stash that had the correct voltage (12V) with the goofy 4-pin plug it used. It however was light on the...
            08-02-2023, 10:07 PM
          • Document Archive
            Design of CCFL Backlight Inverters with Frame & Bar Cores
            by Document Archive
            Design of CCFL Backlight Inverters with Frame & Bar Cores

            Summary

            Portable devices, such as notebook computers and personal digital assistants are developed rapidly nowadays, which places an increasing demand on display technology. The LCD with cold cathode fluorescent back lighting satisfies the requirements on display performance, size and efficiency.

            The backlight inverter plays a crucial role in supplying the power to the lamps of these flat-panel displays.

            The frame and bar ferrite cores, described in this brochure, are especially designed...
            10-07-2024, 04:26 AM
          • caseyjay_48
            Sony KDL-46BX450 Inverter Troubleshoot Logic
            by caseyjay_48
            I am currently on a troubleshoot of 46” Sony KDL-46BX450 tv. I came back from Washington to Texas on medical emergency and had to leave all my tools up there. All I have is a couple of screwdrivers and a dvm. I wish to ask the community a troubleshooting question. Please forgive stupid questions as meds I am taking produce brain fog.
            I have well maintained Sony KDL-46BX450. It went black one day. After turn-on, I get solid green light and Sony logo in screen center for about 1-2 seconds, then black. No blinking LEDs, no hissing. Flashlight test shows screen characters dimly viewable,...
            09-23-2022, 08:08 PM
          • Loading...
          • No more items.
          Working...