Samsung 2693HM white screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • selldoor
    replied
    Re: Samsung 2693HM white screen

    The ohms reading should not fall away - have you good battery in meter?
    Result should be the same as touching probes together.
    "Also, when i move the main board it makes strange sounds, like if some small metal object would move around inside, i can't really locate where it comes from."
    That is exactly what it is - I think it is the rectangular component to the right of the main processor. cant make it out - perhaps 530s or something.
    The screen can be turned from landscape to portrait and the little ball switches the picture.

    Suggest you read these to threads if you have not done already
    https://www.badcaps.net/forum/showth...ghlight=2693HM

    https://www.badcaps.net/forum/showth...ghlight=2693HM
    Last edited by selldoor; 08-12-2014, 09:58 AM.

    Leave a comment:


  • xscp
    replied
    Re: Samsung 2693HM white screen

    I tested the fuse and the reading was going down from around 10 to 0.

    Also, when i move the main board it makes strange sounds, like if some small metal object would move around inside, i can't really locate where it comes from.
    Attached Files
    Last edited by xscp; 08-12-2014, 07:35 AM.

    Leave a comment:


  • selldoor
    replied
    Re: Samsung 2693HM white screen

    Pictures are really good apart from the first one - can you re take it.
    In Pic 5 right in the middle at the top below the connector ther is a small white fuse that looks to sat ?T 3A on it - can you test it.
    No power to the board meter on ohms 200 one probe to each side

    Leave a comment:


  • xscp
    started a topic Samsung 2693HM white screen

    Samsung 2693HM white screen

    Hi.

    I have a Samsung 2693HM that only displays a white screen when it's turned on.

    I took it apart and reseated the cables and it worked fine for a day or two, but then it came back. Reseating the cables don't seem to help anymore.

    I would like to try to fix it, or at least diagnose the problem to see if it's worth getting parts for it.

    I have no experience with electronics, I have access to a simple multimeter and can do basic soldering if needed.

    Any help would be appreciated.
    Attached Files

Related Topics

Collapse

  • harp
    White screen repairs
    by harp
    To ask here... I have few devices with white screen problem, actualy nokia 2220 and some fuji? camera, and try to understand what is common problem to cause that issue.
    Yes, both devices work everything else probably ok, I mean, I hear intro melody and keypress click sound, DTMF tone, power on off... all ok.
    On desk is nokia 2220 slide, and I check all screen connectors and components arround it, measure voltage drop, but all looks ok. I suspect on slide flex cable, but it look ok and white screen is not interupt while flexing board, pushing conectors, and sliding up down. In attachment...
    05-13-2024, 03:43 AM
  • Chrissygizmo
    samsung galaxy ao2s very temperamental after screen replaced
    by Chrissygizmo
    Hi , I've recently replaced the screen in my Samsung galaxy ao2s, at first it wouldn't even turn on, it had the charging symbol on the screen when plugged in but the green circle wasn't going around to show it charging....
    Ive eventually managed to get it on and working but it's very temperamental...

    The battery icon always reads as 50% , when the phone goes into lock screen mode i sometimes can't get the screen back on unless I plug the charger in to get it to light up, also it keeps putting the camera app on.. u think it could be something to do with the side buttons. ...
    05-26-2024, 12:05 AM
  • Ryan.man
    Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
    by Ryan.man
    Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

    My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

    This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
    02-04-2025, 12:23 PM
  • aczelkri
    Samsung LE37B650 white screen
    by aczelkri
    Hey guys,

    I have a Samsung LE37B650 screen with the following symptoms:

    - Image suddenly turned into almost completely white while I was watching a movie. I can make out some details, but they are very faint. There is definitely an image there, but very very bright and maybe inverted colors.


    - If I unplug the cable between the main panel (that has all the video in-out ports) and the tcon board (T315HW02 V3 CTRL BD 31T06 C03), the screen is black as normal (there is backlight and it is masked by the pixels), but of course there is no actual...
    10-14-2020, 05:10 PM
  • EazyBone
    Sharp LC-65Q620U White Screen
    by EazyBone
    Another TV topic!!
    I got this sharp TV that when I first plugged it in it showed the sharp logo and then went to the input screen. This was about 30 seconds and then it showed white screen. Now I can't see anything but white screen. This has a separate TCON and Main.

    The TCON is getting 12V and several parts are as well but the VGH line is only .5Volts which I thought is totally incorrect.

    Am I on the correct assumption that the TCON is bad somehow if I'm only getting that voltage or is there something else I should check?...
    08-21-2024, 12:56 PM
  • Loading...
  • No more items.
Working...