HP M32f FDH Monitor: 12v missing after connect the LVDS ribbon cable to the LCD circuit

[alfredomfr1]

12v pin is shorted to ground in the LCD board (1st picture) if the LVDS cable is disconnected, 12v are OK in the Main Board (2nd Picture)

[lotas]

So, how can I help? You have a problem in the T-CON (short circuit at the 12v input), it could be ceramic capacitors or the DC/DC converter, disconnect the lvds cable and supply power from a lab power supply 8-10v (observing the polarity) and increase the current, see what will heat up (get hot), that will be your problem...

[alfredomfr1]

Thanks for the help I will try and let you know.

[alfredomfr1]

The Capacitor on the top of the board was shorted. Thanks for your help Iotas

[lotas]

The Capacitor on the top of the board was shorted. Thanks for your help Iotas

Ok! Congratulations on the successful renovation.