Announcement

Collapse
No announcement yet.

Samsung SyncMaster 2333 Display Problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung SyncMaster 2333 Display Problem

    Got a Samsung SyncMaster 2333, in powers up and runs fine, however there is problem with the display. As they say a photo is worth a thousand words. I have not opened it up due the fact it turns on.

    The defect dose not affect the check signal box, it will travel around behind the defect and still be visible .
    Attached Files

    #2
    Re: Samsung SyncMaster 2333 Display Problem

    that's the panel.

    Comment


      #3
      Re: Samsung SyncMaster 2333 Display Problem

      Thanks that what I was worried about, I will part it out, for the boards and scrap the rest!

      Comment


        #4
        Re: Samsung SyncMaster 2333 Display Problem

        keep the tubes and the acrylic sheet - handy stuff that.

        Comment


          #5
          Re: Samsung SyncMaster 2333 Display Problem

          Damn! It's late now but.. It's not the panel in the screen part but the Tcon that is exchangeable..
          Last edited by Davi.p; 06-02-2014, 05:38 PM.

          Comment


            #6
            Re: Samsung SyncMaster 2333 Display Problem

            This is a 23" so it may not even have a separate tcon ???
            Most tcons didn't show up till the 24s were introduced

            Comment

            Working...
            X