Started with screen just being black. Backlight was still functioning as I could see it change when it was turned off. The first few times, I could turn it off, then back on again and it would work. The final time, it would show random black and white stripes that flickered in horizontal and vertical directions, then would go back to black. Last week after leaving it on, the screen came back on just with the test pattern (it was no longer connected to a computer), but the background was yellow, not black. This morning it is back to black. It will power on and off, sometimes it shows the white stripes again, but just goes back to black. The backlight still works as if I tap the top of the bezel, or tap the panel, it will flicker with a white light. And when it is turned off, the entire display becomes a darker black.
Attached is what it looked like Friday when it was the yellow color.
The power board on my 2407 went out recently, but when it did, not even the power button would light up. But I guess this one could still have a bad power board. I did take the cover off and didn't see any obviously blown caps like the 2407 had.
Which board is most likely the culprit for this condition?
Thanks
Attached is what it looked like Friday when it was the yellow color.
The power board on my 2407 went out recently, but when it did, not even the power button would light up. But I guess this one could still have a bad power board. I did take the cover off and didn't see any obviously blown caps like the 2407 had.
Which board is most likely the culprit for this condition?
Thanks
Comment