Re: Acer AL1916W, can't find the problem
ok I must have misunderstood something earlier when I said its no good testing lamps as you have no voltages. I have read through and you do have 5v and 13v so do you have any bulbs in anything you can use test are anything you can test these ones in.
If not, do you have a 3v battery or a 500 ohm or 1k resistor perhaps you can force start the power supply with the main board disconnected - that will bring lamps on hopefully.
ok I must have misunderstood something earlier when I said its no good testing lamps as you have no voltages. I have read through and you do have 5v and 13v so do you have any bulbs in anything you can use test are anything you can test these ones in.
If not, do you have a 3v battery or a 500 ohm or 1k resistor perhaps you can force start the power supply with the main board disconnected - that will bring lamps on hopefully.
Comment