Hi everybody.
Have problem with inkjet printer Epson Stylus SX415. I have not used it for about a year. There are ink dried in the print head. First I tryed to clean it thru the menu on printer. It did not improve anything. After removing the print head, I tryed to clean it in ultrasonic cleaner filled with pure alcohol. The result is slightly better, but still bad. Anyone know a better way to clean it? I know that printer is very cheap, and almost not worth it......
Phoenix83
Senior Member
Last Activity: 10-02-2014, 10:26 AM
Joined: 01-29-2014
Location: Partizanske
-
Horizontal Noise on Fujitsu Siemens L19W-2
Hi everybody.
First of all I want to apologize for my bad English.
Have one little problem with LCD Fujitsu Siemens Scaleoview L19W-2. Monitor is showing some moving horizontal noise. It is like the very thin lines moving on screen... I do not know how I would describe it better. Hope You know what I mean. Is visible most on colors like blue, violet, green, grey. On a white or black screen is not visible. I cant take a picture of this, on photo is invisible too. This LCD had problem with backlight. Two dual mosfets SP8K3 was burned. After replacing them, the backligt is ... -
Re: ASUS VW222U, burn-in mode has become activated
Today I have tried it again, with the different PC, and is doing same as before. I'll try to replace the eeproms on the logic board. If find them... -
Re: Acer AL1916W, can't find the problem
Hi everybody.
Whereas it is probably a problem in the mainboard, so I ordered this:
[url]http://www.ebay.com/itm/LVDS-NTA93A-Universal-LCD-Display-Monitor-Driver-Board-For-19-Standard-Screen-/221149190949?pt=US_Laptop_Screens_LCD_Panels&hash=item337d84db25][/url]
has anyone have experience with this?
I hope it'll work.Re: Acer AL1916W, can't find the pro...<br /> <br />Leave a comment:
-
Re: Acer P193W
Firstly, try it with another computer.Leave a comment:
-
Re: ASUS VW222U, burn-in mode has become activated
There's no change, with signal or without. No factory mode options.
Only Burn/in, or No Signal.
I do not know what to do next
Now I noticed, if press the "menu" and the "power" buttons at the same time, the ASUS logo did not appears. Only the No Signal message for a few seconds.
Press only the "Power" button the logo appears.Last edited by Phoenix83; 02-17-2014, 12:14 PM.Leave a comment:
-
Re: Locked HDD
ok. it's done.
Now installing the Win.
ThanksLeave a comment:
-
Locked HDD
Hi
Friend bought a laptop from the internet and the HDD is locked. It's saying:
This drive is locked by bitlocker drive encryption, or something like this. Previous owner said that the password doesn't know. Any chance to unlock it?
Don't think so. Probably he will have to buy a new HDD. -
Re: Cibox LW1922C dead, no power
On that black conn. on the 1st image, measure pins 1, 5, 8, 10 to the GND.
note: do it with logical board connectedLeave a comment:
-
Re: ASUS VW222U, burn-in mode has become activated
Do you think that they can be changed by new ones, or need to be programmed first?
I found them on aliexpress.com cheaply.Leave a comment:
-
Re: ASUS VW222U, burn-in mode has become activated
I also found nothing. On ebay too. On the chips it's written exactly this:
U4, U5:
ATMLH810
02B 1
7J5167A
U8:
ATMLH804
16B 1
P7J2674 D
U9:
ATMEL804
24C08AN
SU27 D
for reading that, I needed magnifying glass 12x
Leave a comment:
-
Re: ASUS VW222U, burn-in mode has become activated
Here's all 8pin chips:
U4 - ATMLH810
U5 - ATMLH810
U8 - ATMLH804
U9 - ATMEL804 these one is marked with purple paint
Menu + >, tried as first
also
Menu + > + Power
and
Menu + Power (7 sec.) + Menu
and
< + > + PowerLeave a comment:
-
Re: ASUS VW222U, burn-in mode has become activated
I tried both.
there's no change.
If the power cord is connected, the monitor statrs changing the colors with that message. I can press the buttons as I want, it doesn't matter. There's no change at all. Except combination "- (left)" button with "menu" button. Then it show the ASUS logo for few seconds and then the NO SIGNAL message and turns to Stand By. By touching the power button it Turns OFF. Touching the power button again it will Turn ON show the logo, for a second, then NO SIGNAL...Leave a comment:
-
Re: ASUS VW222U, burn-in mode has become activated
Button board is connected to the main board thru conn. on 3rd pic (close to this connector is Quartz crystal).
This manual I have.
according to it, the menu button = enter
and the + button = right.
Holding down the menu and power button for 7 sec. and then only menu button do nothing.
also
menu button and + button and power button at the same time (it say enter and right) nothing.
The monitor is from friend's office. Previously worked.Leave a comment:
-
Re: ASUS VW222U, burn-in mode has become activated
Well, the monitor isn't mine. Good idea with the user manual. The buttons are connected to the main board to pins (smaller white conn):
"Power" button - black wire, pin T1
"+" button - yellow wire, pin T3
"Menu" button - green wire, pin T4
"-" button - red wire, pin T2
"S" button - white wire, pin T2
I also measured all voltage regulators, are ok.
Voltage "BLADJ1" - 4,42V
Voltage "BLEN1"...Leave a comment:
-
Re: ASUS VW222U, burn-in mode has become activated
Can't make a good pics... I leave it to tomorrow. At daylight maybe better. But the buttons are fine.Leave a comment:
-
Re: ASUS VW222U, burn-in mode has become activated
nothing.
I'm going to try to break down and clean up those buttons, maybe there is a problemLeave a comment:
-
Re: ASUS VW222U, burn-in mode has become activated
You're right, there's what you wrote. Only thing that does something is button minus and button menu at the same time... it saying Enter and Right, but there's no Enter button. I tried the guides from Google, but nothin works....Last edited by Phoenix83; 02-10-2014, 01:57 PM.Leave a comment:
-
Re: ASUS VW222U, burn-in mode has become activated
It didn't work, no OSD appear.
Leave a comment:
-
ASUS VW222U, burn-in mode has become activated
Hi everybody.
I have the monitor Asus VW222U. But it has a problem, of course When it connects to the electricity, without touching any button, it starts changing colors through the spectrum with this message: "ENTER and RIGHT to burn it OFF". The monitor can be turned off, by simple pressing the power button. If turned on again, the colors and the message will appear. In this state remains till touching the power button or pulling out the power cable. So I think the power supply and the inverter is OK. I found somewhere on the net, that when the monitor is off, and is pressed...
No activity results to display
Leave a comment: