Hi, i have problem with 17" HP L1706, i have done recap. Monitor turn on and "check signal" logo is OK, but when i plug in the RGB cable the picture is too lighten and color are not good. I have try to factory reset, change cable, check cable between board and LCD. The problem is grey is light blue and things like that. I use exact value when recaping.
-
...the quieter you become the more you are able to hear... -
Re: Hp l1706
Here i schematics....the quieter you become the more you are able to hear... -
Re: Hp l1706
I noticed that whine is like light blue. rest of color is OK....the quieter you become the more you are able to hear...Comment
-
Re: Hp l1706
Does it have the same problem if uses with another PC?Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Re: Hp l1706
yes, i connect cable...the quieter you become the more you are able to hear...Comment
-
I have a broken connector (believe it's a 6 pin mini-DIN) on a cable. The metal shroud and all but one of the pins are separated from the cable, and just stuck together for the photo. The other end is an unknown rectangular connector. The cable is for the foot pedals on an Italian made electronic piano, and the company is out of business. Looking for ideas on how to fix it. I have a soldering iron, but I'm not very skilled at soldering, so getting a retrofit for the broken end may be beyond my ability. The other end would be easier to replace, if I could get a mini-DIN cable with the same number...
-
Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.
The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.
Original T-con:
Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.
First replacement T-con:
I thought it might be t-con and ordered new t-con from china(supposedly tested)... -
While at university, I connected my HP-Pavilion x360 14-dw0156ng laptop, running Windows 10, to a monitor using a provided USB-C cable. Immediately after this, my laptop's screen turned black and the device stopped working entirely. There are no signs of life such as fan noise or LED indicators, holding the power button does nothing. I've previously used this same monitor model and cable without issues, the cable typically charges the laptop as well.
I've attempted holding the power button for over 30 seconds, removing and reinserting the battery, and trying to power it on with only the...01-16-2024, 11:35 AM -
Hi all, please
I just want to make a "usb c" charging cable from 5V power supply (have cut cable w/ red black green and white pins connected from factory.... i just want to use 500mah max !
How do I connect this ? if I do not have CC1 /2 physically wired, how to proceed?
NOTE: an identical new (not cut) USB A to USB C cable charges my phone but not the remote control!
here is a picture of the remote, the cable to be used and a picture of what are the factory connected pins
thanks in advance!!
... -
Hello friends,
I have a problem with this printer Xerox Versalink C505 , printing perfectly in B&W but bad in color.
There is a little yellow ghost printing around color print.
So little text in color is unreadable.
I already change drum cyan & yellow with no success.
I try (i think) all avalable calibration in printer menu..
(black drum is dead but it's not the problem i think)
I'm not a printer specialist,if anyone has an idea?
Thanks !...12-01-2024, 09:08 AM
Comment