Hanns-G HG281D issues
After reviewing all the posts re. no power and the associated symptoms, I replaced the caps on the power supply board. Surprisingly, still no power. What would the next step be ?
Thanks
Thanks
-
-
Re: Hanns-G HG281D issues
what main board in it! if vx2835 r3.1 has a known issue with c124 an c126, replace them! -
Re: Hanns-G HG281D issues
Hi,
I'm new to these boards. My Hanns-G HG281D just up and died yesterday. No power and no blue light indicating power. I bought it over 3 years ago and it now out of warrant.
My model is HG281D PBUFK11.
After going over the posts here I suspect the caps are bad. My question to someone here is I also see some white stuff that kind of looks like dried glue on or near the caps and am trying to determine if it has come from the caps or not. It is all over my board in spots near almost all electrolytics and ceramic caps. Honestly, I've never seen stuff like this and am wondering if this is normal glue to hold the parts or leakage from the caps. Any suggestions are appreciated. All the electrolytics seem normal, with no bulging.Attached FilesComment
-
-
Re: Hanns-G HG281D issues
It is normal glue. Nothing to worry about. In the main megathread, I have extensively helped people with this monitor, read through it on how to measure the voltage.
It contains almost every problem seen with this monitor.
https://www.badcaps.net/forum/showthread.php?t=11329
Note there are at least 5 or 6 other threads pertaining to the same monitor.--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---Comment
-
Re: Hanns-G HG281D issues
Hi,
Thanks for the quick response. I'll see what I can do about the pic's. I'll have to go find my good camera and post better picks tomorrow.Comment
-
Re: Hanns-G HG281D issues
Doing this the right way ...
I re-capped the power supply board after the monitor was increasingly difficult to power on and finally wouldn't turn on at all. I measured the voltage at CN5 and the voltage fluctuates around 5v and is not stable. I don't see +12v on CN7. No blue or amber light.
ThanksAttached FilesComment
-
-
Re: Hanns-G HG281D issues
The 5V should be steady,suggest you plug the Power supply into the mains supplyAND have NO other Boards plugged in, and then measure for the 5v output from the boardComment
-
--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---Comment
-
Re: Hanns-G HG281D issues
UPDATE - I ended up just replacing all the caps in the switching power supply and it seems to work. Although, it initially acted weird, the screen going black after being on for 10 seconds. then shut down. I then re-seated all the connections and tried again and it has started up the last couple of times I've tried it. I'm worried that maybe the main logic board might be flakey when it heats up so I'm doing a burn in test right now to see if it dies again.
Once again, thanks for the info on this site. You guys ROCK!Last edited by mikebe; 09-09-2012, 01:16 PM.Comment
-
Re: Hanns-G HG281D issues
From the company (not eBay) website the caps that I replaced were :
qty 1 1000uf 35v capacitor
qty 2 1000uf 25v capacitors
qty 1 1000uf 10v capacitor
qty 1 470uf 35v capacitor
qty 1 470uf 25v capacitor
qty 1 470uf 10v capacitor
qty 1 22uf 35v capacitor
qty 1 10uf 50v capacitor
qty 1 2.2uf 50v capacitor
Of course, I see that the complete kit has 14 (not 10) caps and at one point I did have to choose which of (2) caps to replace. They all look to be Nichicon.
Something else, I didn't realize how delicate the etchings were for one cap (c114) until it was too late so I munged one of them. And I assume that's a pretty important one also. Probably now need a new PSM board unless I can fix that ...Comment
-
Re: Hanns-G HG281D issues
follow trace to find were ya can solder a wire onto post pics makes it easier!Comment
-
Re: Hanns-G HG281D issues
Well, I spoke too soon!
The monitor worked for about 4 days and just up and died again tonight! Now every once in a while the power indicator will blink bright blue once or twice and then go dark. This is now after having replaced all the caps on the power supply. When I attempt to power it on, nothing happens.
Any suggestions?Comment
-
--- begin sig file ---
If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.
We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.
Please do not post inline and offsite as they slow down the loading of pages.
--- end sig file ---Comment
-
Re: Hanns-G HG281D issues
So last night I got fed up and left the monitor in what appeared to be in the off position. Black screen and no power light. Then I come downstairs today and find the monitor on and the power light glowing blue and my monitor displaying a web page. So, at this point I'm perplexed. I've turned on and off the monitor several times and it appears to be working fine now except the VGA input does not work any longer, only the HDMI input. Any ideas what may be happening now?Comment
-
Re: Hanns-G HG281D issues
Check for bad solder joints on the caps you replaced. Since you damaged the solder joint on C114, try soldering a wire from the damaged lead of C114 to the next solder pad that was connected to the damaged pad of C114.Comment
-
I have a Lenovo IdeaPad Gaming 3 15ACH, which has started exhibiting the well-known issues of the Lenovo IdeaPad 3.
All stress tests run perfectly, and there are no performance issues. However, the solder joints are almost certainly starting to fail. If the top two screws on the back are not screwed in, moving the screen results in a BSOD or, in some cases, a slight artifact and freeze. This is a 2023 notebook..
How can I extend its lifespan? Could reflow help?
It has ryzen 5 5500h, rtx 2050, no soldered ram.
Example of the artifacts:
...03-01-2025, 11:11 AM -
Customers laptop had a Motherboard go bad and replaced it. they want to try to get data but. I am having bitlocker issues. I will list below
Issue 1: When connect the drive to my computer to decrypt it I get this message. "there are no supported protectors on this drive the drive cannot be unlocked"
Issue 2: When I run powershell as admin and try manage-bde -protectors -get e: I get this message. " ERROR: An attempt to access a required resource was denied. I also get the same error when I try manage-bde -status e: When I try the same with terminal with... -
Hey I am having Asus Rog strix g15 g513ih hn0865 and it's having display issues while running on igpu. Works fine when I open any game or whatsapp windows application. The issues are :
Black screen, freeze
The weird thing is that when as long as the laptop is running on igpu the problem keeps happening. But as soon as I open any game or whatsapp windows application, the laptop works completely fine.
When the screen freeze or black screen I used to move the display lid up and down and it usually works like that.
So can anyone tell me what would be the possible cause?... -
Hi All.
Sorry ahead of time for the text wall. This is a strange problem and I have tried to explain it as best I can. I realise this is a hardware forum (mostly), but I am still not sure if this is even a hardware fault! I am hoping that someone more knowledgeable than me in the area of understanding installation logs, or someone that has had a similar issue in the past may have some ideas of what might be causing this.
The issue:
Unable to do a clean install of any macOS versions supported for this model, even after fully erasing and formatting the internal SSD,... -
Greetings everyone,
I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...
The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.
Upon closer inspection...
Comment