Re: Hanns-G HG281D issues

From the company (not eBay) website the caps that I replaced were :

qty 1 1000uf 35v capacitor
qty 2 1000uf 25v capacitors
qty 1 1000uf 10v capacitor
qty 1 470uf 35v capacitor
qty 1 470uf 25v capacitor
qty 1 470uf 10v capacitor
qty 1 22uf 35v capacitor
qty 1 10uf 50v capacitor
qty 1 2.2uf 50v capacitor

Of course, I see that the [U]complete [/U]kit has 14 (not 10) caps and at one point I did have to choose which of (2) caps to replace. They all look to be Nichicon....

Re: Hanns-G HG281D issues



Doing this the right way ...

I re-capped the power supply board after the monitor was increasingly difficult to power on and finally wouldn't turn on at all. I measured the voltage at CN5 and the voltage fluctuates around 5v and is not stable. I don't see +12v on CN7. No blue or amber light.

Thanks...

After reviewing all the posts re. no power and the associated symptoms, I replaced the caps on the power supply board. Surprisingly, still no power. What would the next step be ?

Thanks