Syncmaster 245B plus black screen power button light works

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • dylanneke
    New Member
    • May 2012
    • 2
    • belgium

    #1

    Syncmaster 245B plus black screen power button light works

    Hello guys, I think the problem with my screen is a failing power supply.
    The BN44-00195A type. Is it possible to get a schematic from it anywhere? I really cant find it.





    Thanks in advance.
  • Nocta
    Senior Member
    • Mar 2012
    • 117
    • Argentina

    #2
    Re: Syncmaster 245B plus black screen power button light works

    Can you upload pictures of your board (from both sides)?

    There're a couple of threads about your powerboard. Take a look at this one: https://www.badcaps.net/forum/showth...ht=BN44-00195A

    Comment

    Related Topics

    Collapse

    • Yehuda170
      ThinkPad P15s Gen 1, NM-C931 REV 1.0 touch screen replaced only works in UEFI menu
      by Yehuda170
      original screen was BOE NV156FHM-T07 with On-Cell Touch screen I²C

      replaced with what was in my stock, which is IVO R156NWF7 R2 which is also with On-Cell Touch screen I²C

      now touch screen works perfectly in UEFI BIOS menu & boot menu. but not working in OS, tried windows & linux too

      with original broken screen i can see in device manager touch screen in human interfaces

      but with the new screen it's not showing in device manager

      is it lenovo blocking it? is it driver missing?

      I²C is a headache
      07-14-2023, 01:29 AM
    • smic717394
      iphone XS turns off when press on screen.
      by smic717394
      Hi,

      I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
      07-25-2024, 10:16 AM
    • Ado02
      MacBook Pro A2159 - No Display / Works on External Screen
      by Ado02
      Hi,

      I am working on a MacBook that came in for a screen replacement. The MacBook powers on and works on the external screen. However, the screen stays black. The replacement screen made no difference. On further investigation, I found small amounts of corrosion.

      Please see the attached image.

      I ordered a refurbished logicboard, but the problem didn't go away with the old or replacement screen.

      Can anyone suggest where to go from here?...
      01-12-2023, 03:35 AM
    • Chrissygizmo
      Samsung UE55JU6800K half screen dark
      by Chrissygizmo
      Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
      I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
      02-10-2025, 12:33 AM
    • DqMagetz
      Acer Nitro 5 AN515-54. displays on the external monitor and works fine, the issue is NO display on the internal screen
      by DqMagetz
      Good day!
      I have a customer's laptop — Acer Nitro 5 AN515-54 (EH5VF - LA-H501P). It has a display on the external monitor and it's working fine, but the issue is NO display on the internal screen. I already replaced the eDP cable and checked the LCD connector pins.

      Here are the voltage readings:
      • Input – 19V (stable)
      • +LCDVDD – 3.3V briefly, then drops to 0V
      • EDP_HPD – 3.3V briefly, then drops to 0V
      • PCH_BKL_PWM – 2.2–5V briefly, then drops to 0V
      • EC BKOFF# – 1.8V briefly, then drops to 0V
      • PANEL_OD_EN – 0.3V

      Is it possible that the EC chip is corrupted or damag...
      07-12-2025, 09:37 PM
    • Loading...
    • No more items.
    Working...