SCEPTRE X9G Naga V water around screen border

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wilsoncomputer
    New Member
    • Dec 2011
    • 2

    #1

    SCEPTRE X9G Naga V water around screen border

    Hi,

    This is my first post here. And I just replaced caps on my 2nd monitor (this SCEPTRE X9G). The 1st monitor went very well thanks to the great info I have learned from these forums!

    The SCEPTRE monitor would not power on at all, so I took it apart and found 2 swollen 1000uf 16v caps. I replaced them both, and they were the only 2 of that same type on the board. The monitor powers on fine now with the new caps, but I must have messed something else up since there is this weird looking layered (like a topography map), cloudy or wet looking border all the way around the screen. Almost like a border you would add around a picture. Any ideas what would cause this?

    I took several pictures of it, but none of them do justice. The best one is attached here.
    Attached Files
  • retiredcaps
    Badcaps Legend
    • Apr 2010
    • 9271

    #2
    Re: SCEPTRE X9G Naga V water around screen border

    Try cleaning and reseating all your connectors?
    --- begin sig file ---

    If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

    We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

    Please do not post inline and offsite as they slow down the loading of pages.

    --- end sig file ---

    Comment

    • PCBONEZ
      Grumpy Old Fart
      • Aug 2005
      • 10661
      • USA

      #3
      Re: SCEPTRE X9G Naga V water around screen border

      Looks like the layers of the LCD are separating.
      .
      Mann-Made Global Warming.
      - We should be more concerned about the Intellectual Climate.

      -
      Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.

      - Dr Seuss
      -
      You can teach a man to fish and feed him for life, but if he can't handle sushi you must also teach him to cook.
      -

      Comment

      Related Topics

      Collapse

      • Ryan.man
        Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
        by Ryan.man
        Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

        My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

        This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
        02-04-2025, 12:23 PM
      • smic717394
        iphone XS turns off when press on screen.
        by smic717394
        Hi,

        I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
        07-25-2024, 10:16 AM
      • dbuergi
        Macbook A1466 820-00165A heavy water damage but working with "flashing" screen
        by dbuergi
        Hi all,

        i got a A1466 with serious water damage. I was able to clean the whole board and only found a fuse with a coroded trace. Cleaning and resoldering did the job and the macbook started normal but after some time the screen began "flashing" like turning on and off while the Macbook was still running. I checked the board again but was not able to find the problem until now.
        Any ideas where to look?...
        11-07-2024, 10:57 AM
      • Chrissygizmo
        Samsung UE55JU6800K half screen dark
        by Chrissygizmo
        Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
        I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
        02-10-2025, 12:33 AM
      • sam_sam_sam
        20 year old Kenmore refrigerator ice maker bad water valve coil took a crap
        by sam_sam_sam
        I got lucky that when I got home and was about to get some ice out of the ice dispenser I hear and see water running down the outside of the ice dispenser what the heck is going on here

        At first I thought that the ice dispenser mold was cracked so I brought a new ice maker because this one has been in there for about 10 years now

        Well I put the new one in and wait and I wait for the water valve to open and let water in no such luck well there is a way to check the function of the motor and the water valve on this ice maker just need a jumper wire “L” to...
        04-09-2023, 08:04 PM
      • Loading...
      • No more items.
      Working...