syncmaster 913n flickering led

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Amraks
    Badcaps Veteran
    • Nov 2011
    • 725
    • Australia
    #21
    Re: syncmaster 913n flickering led

    Ahh not good mate sorry to hear about that, you solved it but she broke it. Keep her your ex too, Don't need that in your life.

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • reessi
        ACER BM320 Monitor - Horizonal Flickering Lines After a While
        by reessi
        Hello,

        The monitor started off showing flickering thin (1 pixel) lines horizontally every say 3mm..

        They are black on the right and gradually fade to nothing on the far left.
        They start either after 5 mins or up to 2 hours after so annoying for testing.
        They flicker continuously very fast! With a slight pause milli-second every second.

        Initially I cleaned the LVDS cable and connected to the T-Con and then it worked fine for 3 weeks but not sure if this was just co-incidence.

        I tested each half by removing the first the left flex from...
        06-03-2025, 09:58 AM
      • Jaysean
        Acer VN7-591G-70RT Display Flickering
        by Jaysean
        Hello Badcaps coummunity hope you all are having a bless day,

        Hope I didn't post it wrong kinda new at forum site rules and tradition

        So I'm dealing with screen flickering problem on my laptop.

        I'm not quite sure if it's the display cable or the screen itself that's causing the issue,

        so I'm turning to you all wonderful expert on Badcaps for some guidance. Your help is much appreciated!

        [Screen Flickering](https://i.imgur.com/xK9vHqc.mp4)
        [HDMI port to external display seem to work be working](https://i.imgur.com/snSC24e...
        10-27-2023, 10:22 AM
      • arctor
        LG 55uh661v flickering images and lines
        by arctor
        Hi, I have this tv a LG 55UH661V that show flickering images and lines. I tried to take off one at time the right and the left ribbon cable and put the tape for ask the pin…but nothing working. Or I stop to have picture or still flickering. Someone can help me to understand what pin I have to mask? What I notice the buffering board, the flat cable becomes very hot, I don’t think it s normal, I’m talking about the orange flat cable soldering on the buffering board, both side are very hot. I give you the photo with both the ribbon cable on and a photo with the right off and with the lefts...
        06-16-2025, 11:57 AM
      • Adenitz
        Cutting the jumper on Samsung TV to solve the flickering
        by Adenitz
        Hello to all,
        I have just seen this YT video about solving flickering issue on SAMSUNG TV. Reading many comments it seems this works.
        But I wonder what is done here and how this solved the issue. I'm not able to find the schematics so cannot explain to myself.
        Few years ago I had a flickering problem on one monitor in some factory which I managed to solve by inserting UPS between monitor and power outlet. I also notice on this occasion the flickering was gone if I put insulation tape on the power plug like shown in the attached picture to remove connection with the PE conductor...
        01-06-2024, 12:20 PM
      • survivalbloke
        HP ENVY HP 13-aq1013dx - screen flickering black if using touchpad or external mouse
        by survivalbloke
        HP ENVY HP 13-aq1013dx
        SN: 8CG0213H8W
        ProdID 3C311UA

        This device came in due to the screen flickering if you use the touchpad or external mouse. It will flicker black when this occurs. If you use the touchscreen, the behavior does not appear. Also, if connected to external monitor, the external monitor is not affected by the flickering. I did a good amount of research on this, and concluded that it is due to the display driver. HP does not offer Windows 11 drivers for this model so I got the replacement drivers direct from Intel. I installed them and the problem...
        05-08-2025, 12:21 PM
      • Loading...
      • No more items.
      Working...