Announcement

Collapse
No announcement yet.

FPD2485W - Fried Circuit board

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    FPD2485W - Fried Circuit board

    Hello everyone

    My monitor suddenly stopped working with a little smoke coming from the back,
    inside on the powerboard there is a small circuit board with some burnt up and missing smd resistors and capacitors.
    I also found a mosfet (2761I) to be shorted (which i think might have caused the damage) and a large Capacitor which had burnt up badly.

    I didn't notice any of these little black resistors loose in the case so i assume they've been disintegrated or just fell out without me noticing.
    But i do believe they where there according to other people's pictures i've looked at.

    Does anyone just happen the have one of these power boards handy so you could take a picture of it for me?
    Attached Files

    #2
    Re: FPD2485W - Fried Circuit board

    The cap @ centre left looks goosed too. Also I would say that the two sets of pads (R819, C815?) were probably vacant at manufacture.
    System: HP xw6600 Workstation, 650W PSU | 2x Intel Xeon Quad E5440 @2.83GHz | 8x 1GB FB-DDR2 @ 667MHz | Kingston/Intel X25-M 160GB SSD | 2x 1TB Spinpoint F3, RAID0 | 1x 1TB Spinpoint F3, backup | ATI FireGL V7700 512MB | Sony Optiarc DVD +/-RW | Win 7 Ultimate x64 | 2x Dell UltraSharp U2410f | Dell E248WFP

    Comment

    Working...
    X