Re: Acer P193w - blink screen
Well done,glad you are up and running again.
Well done,glad you are up and running again.
-
-
Re: Acer P193w - blink screen
hi! i'm new here. i have the same model as this and got the same issue. two ccfls on top are busted. it's hard to get a replacement from where i am.
is there any way i could run this lcd with only 2 bottom ccfls?
i saw an article online about bypassing the feedback.
http://www.bestelectronicarticles.co...ht-system.html
can this be done so i can run it with busted ccfls? if yes, how? i can't find the datasheet of the inverter ic.
btw, i already removed the busted ccfls, replaced the ecaps and reflowed some bad solder.
thanks in advance!
Comment
-
Re: Acer P193w - blink screen
I have the same problem, but if i connect all 4lamps it blinks if i connect only 3 lamps it still image for 3 secs. then off.Comment
-
Re: Acer P193w - blink screen
I have 14,85v at d803; 5,08v at d805;
I have 14,85v at u502; 6,89v at u501 but in this case variable to 0v-6,89v continuosly.
I have changed 5 caps; 2 of 1000uF, 2 of 470uF and 1 680uF.Comment
-
Re: Acer P193w - blink screen
Well without a cct diagram,its impossible to help, as who knows what D803,D805 etc are,and where they are in the cct,have you got a schematic ?? and if so put it on here,and then hopefully you will get some guidance.Comment
-
For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
Re: Acer P193w - blink screen
Service manual does not see this.
I have 6,89v at primary t501 and 6,89v at primary t502, but only for 2 secs at power on.
Whitout power it has 485 kohm and 482 kohm between the two out of t501 and t502Comment
-
Re: Acer P193w - blink screen
OK, you have got 'Two seconds to black'. You've established the transformers are likely good; that eliminates one of the probable causes.
Have you tried substituting known good CCFLs? Or hooking up a known good panel?
You stated you replaced a number of capacitors. What brand and series did you use as replacements?
PlainBillFor a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
Re: Acer P193w - blink screen
I have subst with DAEWOO units.Comment
-
For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.Comment
-
This specification for the Acer Chromebook 12" HD+ screen, Intel Celeron, 4GB RAM, 32GB Hybrid (2-in-1) can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 12" HD+ screen, Intel Celeron, 4GB RAM, 32GB boardview and 12" HD+ screen, Intel Celeron, 4GB RAM, 32GB schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly...09-06-2024, 04:40 PM
-
Hi everyone,
I have this strange behaviour with Acer Aspire E5-574-52RH, i5 6200U, intel graphics, DA0ZRWMB6G0 Rev G, model ZRW.
Laptop came in for a SSD upgrade, took everything apart to install the SSD.
Everything started after modifying BIOS settings to boot UEFI instead of Legacy.
Laptop works fine, i installed windows 10 and drivers/updates, everything works ok(when it works)
The black screen problem is random, maybe 5 out 10 times, laptop remains with the black screen, no image
Symptoms are:
- random black screen after displaying Acer logo... -
Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!
My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.
This time the original cable broke too close to the screen, it can't be fixed without tearing the screen... -
Acer A315-24p-r2km Acer N23C3 snid: 32400005934 s/n NXKDEET00B3240003B3400 Main: IH5JM LA-M611P Rev: 1A
As per the title, the screen remains black. When the power button is pressed, the blue LED lights up, but the screen is black.
With an external monitor and HDMI output, there is no image. I loaded the following bins, same situation: ACER_A315_24P_IH5JM_LA_M611P_REV_1A_2022_08_22_WORKING_BIOS_100% IH5JM120.bin from this address https://www.badcaps.net/forum/troubl...a-m611p-rev-1a With the RT 809F programmer, I can't read the contents of the original XMC 25QU128CH1Q SPI, I get the...07-31-2025, 04:19 PM -
Hello, I was offered an acer nitro 5 motherboard (i5 10300h + gtx 1650) and I have this little question, is it possible to just connect this motherboard through hdmi and have picture and access the bios without the drivers and windows? because I don't have the display for this one.
I had an old acer with ryzen 2500u without display that was able to access the bios using hdmi only, but with this intel model I don't know. So it would be appreciated if someone knows if this is possible.
Thanks!
...09-25-2025, 09:48 PM
Comment