Help Dell E173fpb 17inch monitor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mastercare
    New Member
    • Sep 2010
    • 5

    #1

    Help Dell E173fpb 17inch monitor

    Hi all just joined the forum after some help if anyone knows what this problem may be...
    i aquired this monitor about a year ago from our local landfil site it was dead anyway thanks to the internet found that the 2 pairs of invertors can go short so i repl all 4 ...bingo all worked fine...component ref q740 q760 q739 q759..

    problem now very different it will switch on fine and work some times for 10 mins sometimes for hours but then it just goes off. we found if we unplug the mains for a short while it then powers up again fine. there is no standby light its just as if you have pulled the mains. i am checking caps for bulges etc but no luck there has anyone had these symptons or could suggest a fix,,
    many thanks agn
  • seanc
    Badcaps Legend
    • Nov 2008
    • 1319

    #2
    Re: Help Dell E173fpb 17inch monitor

    Do the standby and power led work correctly during the time the monitor is working?

    Sounds like the PSU is shutting down because it's detecting a short or you have bad solder joints.

    Comment

    • mastercare
      New Member
      • Sep 2010
      • 5

      #3
      Re: Help Dell E173fpb 17inch monitor

      hi thanks for reply..
      yes power etc works fine while monitor is behaving...at mo just soldered some joints and dell test logo is bouncing around the screen..
      i will leave it on and see what happens..
      thanks again..

      Comment

      • retiredcaps
        Badcaps Legend
        • Apr 2010
        • 9271

        #4
        Re: Help Dell E173fpb 17inch monitor

        Originally posted by mastercare
        at mo just soldered some joints and dell test logo is bouncing around the screen..
        You *must* resolder all the inverter transformer (the 4 yellow boxes that start with a "T") pins for Benq power/inverter boards. If you don't, it will cause the c5707 transistors and the picofuse to possibly go bad or cause symptoms like what you are seeing.
        --- begin sig file ---

        If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

        We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

        Please do not post inline and offsite as they slow down the loading of pages.

        --- end sig file ---

        Comment

        • mastercare
          New Member
          • Sep 2010
          • 5

          #5
          Re: Help Dell E173fpb 17inch monitor

          Originally posted by retiredcaps
          You *must* resolder all the inverter transformer (the 4 yellow boxes that start with a "T") pins for Benq power/inverter boards. If you don't, it will cause the c5707 transistors and the picofuse to possibly go bad or cause symptoms like what you are seeing.
          thanks for the information, i have soldered all the pins on the transformers and so far so good, its been running now for about 4 hours so i will see how it goes..
          many thanks guys.

          Comment

          • kc8adu
            Super Moderator
            • Nov 2003
            • 8829
            • U.S.A!

            #6
            Re: Help Dell E173fpb 17inch monitor

            resolder the grey box caps and the 5707's too

            Comment

            Related Topics

            Collapse

            • Bowline
              Dell E6400 PT434 type Battery Charging Stuck at 1%. Battery Pinouts?
              by Bowline
              My question pertains to understanding the control circuity inside a Dell PT434 type battery used in Dell E6400, E6410 and other Dell notebooks?

              Does anyone have a circuit diagram for the inside of a Dell PT434 battery and/or a description of how the control lines work to control this battery?

              My reason for asking is I have a battery which I cannot get to charge beyond 1% in a Dell E6410 or E6400.
              The LED bar graph charge indicator on the battery shows one LED lighted when the info button is pressed.
              I have tried multiple different Dell power adapters. My Dell...
              06-11-2025, 10:13 AM
            • DanPoka
              Guide me through repairing a Dell p2210f LCD ccfl backlight monitor
              by DanPoka
              I bought this p2210f dell monitor to fix. Schematic is the same as p2210.
              Behaviour is that monitors comes on but then backlight switches off almost instantly. If I look with flashlight I can still find the "No signal message". So definitely a backlight issue. Trying to advance the issue I proved that the protection circuit is switching off the backlight by shorting out C3 and resistor to disable the INL chip then re enable by removing the short.
              This is where it gets interesting. When I disassembled the monitor to solder leads on c3 capacitor I noticed the backlight flickered...
              02-15-2025, 05:05 AM
            • momaka
              HannStar Hanns-G HC194d LCD monitor repair
              by momaka
              Normally, I never post repairs this quick after I do them, because… I am usually very slow. But today, I’m making an exception here. Why? No idea. Perhaps only because the repair details are still “fresh” in my head… which is ironic, given this is a 16 year old monitor that hardly anyone will care about today. It is new to me, though. I picked it up last November from someone on my local Craigslist. It wasn’t very close to where I live, but was close to a family friend that I had to go visit anyways. So after watching the posting on Craigslist for a few weeks and seeing it getting...
              03-15-2023, 10:17 PM
            • Jesus Coder
              Issues Reviving Old Dell 2408WFPb Monitor
              by Jesus Coder
              Hello everyone,

              I have been having some difficulties reviving an old Dell 2408WFPb PC monitor that I received for free. When I first acquired it, the backlights of the display were on but alas no image was showing. After extensive research on the topic, I went ahead and purchased a new t-con board for the monitor. After installing the board, I was then presented with a new screen that was half black and half green (more so black). I have been unable to figure out what to do next as I have limited knowledge of display electronics. Might anyone on this forum have an idea of what may...
              06-25-2023, 02:33 PM
            • ChristianBr01
              Dell 34 inch U3419W Monitor with thin stripes on partial screen
              by ChristianBr01
              Hello everyone,
              I have a Dell U3419W Monitor that has some thin stripes on a part of the screen since Tuesday.
              This lines cover about a third of the screen and appear for 2 seconds before disappear for another 2 seconds.
              This repeats the whole time. I have not opened the case yet cause I had no time, but will try to fix it on this weekend. For me, it looks like a problem on the TCon... Am I right?
              Does someone have seen this before?...
              05-23-2025, 06:06 AM
            • Loading...
            • No more items.
            Working...