Denon avr-x2000 no sound on main zone

[budwich]

Re: Denon avr-x2000 no sound on main zone

no confusion, just wanted to be sure of the timeframes and actions. You might consider redoing the update process.

[gvse]

Re: Denon avr-x2000 no sound on main zone

Here is the current summary:

1. Analog audio: (direct or any other mode) - no sound on main zone. Zone 2 good.
2. HDMI: All ports works for video. The audio doesn't work irrespective of AVR or TV. Tried with 2 different hdmi sources and same results.
3. Network player: Works only on zone 2.
4. Tuner: Works only on zone 2.
5. OPT1: No sound
6. GUI: Works intermittently.

Running through all the paths, especially analog pass through and hdmi with TV audio .. both take completely different paths and both do not work. Wondering if there is some sort of muting that is happening because of a DSP or some other issue ?

[budwich]

Re: Denon avr-x2000 no sound on main zone

AND, your test tones don't work... :-).... :-(

[Gumboil]

Re: Denon avr-x2000 no sound on main zone

Check if the small rectangular voltage regulators on top of the the HDMI board (U3601-U3605, EX3AV written on top) are OK. Each is responsible for an essential voltage for the HDMI chipset. See service manual p.142.

Im going to revive this, seems more info and replies on this one than on mine. Anyway...I pray someone cane help me to get me receiver back up and running. Same model as OP, only thing is, I have no sound on any channel, even direct does not work. I have done this as well, and is within spec as per the service manual. My GUI also seems to be a bit off, a bit lazy if I can say that. Wierd thing is, when accessing the menu, on the display on the reciever goes dim, but only when selecting certain sub menus or items. If I go back to the sub menu above that it foes to normal brightness again. Any advice would be appreciated pls.