Just picked up this original Zamp. Only hooked it up in place of my Schiit Magni 3 momentarily to see if it functioned. Owner warned me the auto-on-off does not function and the unit must be unplugged to shut off. Has massive hum in both channels. The owner swears it must be a ground loop issue, which I've read they are sensitive to, but after opening the chassis up, I was met by a very uninvited ensemble of guests.
Needless to say I started writing down values and taking measurements and then fired up Digi-Key.
Needless to say I started writing down values and taking measurements and then fired up Digi-Key.
Attached Files
Comment