Onkyo tx-nr509 tuner no sound

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dark84
    New Member
    • Sep 2014
    • 7
    • Serbia
    #1

    Onkyo tx-nr509 tuner no sound

    Hi!
    My Onkyo tx-nr509 is working good. I am using network radio, analog input, digital input. All working ok. But if i want to listen fm or am radio i have no sound, just silence. On display i have tuned and have radio text, all thing is ok. Just no sound? I have another unit with wrong hdmi board. I put the good board in another unit and have same thing. No sound if i want to listen fm or am. I thing that i have problem with hdmi board, because i have problem with both receiver with same hdmi board. I have the service manual, but if i see good, the tuner section is on the main board. Thanks for the answers, and sorry because my bad english.
    Last edited by dark84; 07-14-2020, 01:05 PM.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • ChaosLegionnaire
      what i went through dealing with my mobo with dead onboard sound!
      by ChaosLegionnaire
      so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

      i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
      09-13-2022, 09:02 AM
    • FrancescoV
      Onkyo HT-R390 no sound output, video output ok
      by FrancescoV
      Good morning everyone,
      I'm trying to repair an onkyo ht-r390 that has no sound output, despite the volume being at maximum, the rest seems to work; the video output signal (coming from an hdmi input) is present, but the audio is absent. Similar situation if I send an audio signal from any input I have no output.

      The firmware reported is the following:
      M:1.00/11107BLP
      D:?.??/????????
      O:1.00/11107AL

      The DSP firmware given the question marks seems corrupt.

      On the BCHDM-0678 - 25140678 - QPWBCHDM0678A0 board the chip that usually seems...
      05-11-2025, 02:59 AM
    • platinumsteel
      Onkyo HT-R960 No Sound
      by platinumsteel
      Hi guys hope you all doing fine.I have an Onkyo HT-R960 from my uncle that he says he powered it on one day and no sound at all.I took it to try and repair it.I am also using it as an opportunity to start learning how to repair units like these and also amplifiers. When i first brought it home I also realized it wasn't outputting any video and audio tru the HDMI Ports.So followed a youtube video on how to change 5 caps to get HDMI output back.Did exactly that and now i have Picture tru the HDMI Ports.But still no audio. Checked a lot of voltages according to the schematic and also visually nothing...
      06-14-2023, 12:23 PM
    • Sushi1808
      Onkyo TX-NR609 Sound only on USB/Internet Radio/DLNA Input
      by Sushi1808
      Hi everyone!

      I turn to you in hope someone could point me in the right direction since I lack knowledge and experience in diagnosis of audio equipment. (My experience is in computer chip level repairs.)

      I bought an Onkyo TX-NR609 receiver which initially produced no sound on speakers/headphones, there was no delayed relay click, speaker matrix icon didn't show up, USB/NET stuck in "Now initializing", instead of DSP/1st NET firmware version there were ?????????...

      There was flux residue around the D830K013BZKB4 DSP chip (Q3001) on the HDMI...
      07-01-2023, 07:53 AM
    • shelby5041
      clock radio / radio lifespan?
      by shelby5041
      hi
      ive got a modern digital clock radio approx 15yrs old

      my question is how long can a clock radio or a simple radio last ss farcas operating hours?

      since elec components have limited hour lifecspan i would imagine the radio or clock radio would eventually fail.

      the reason i ask is because i have my clock radio on radio function 24/7 for the past 7 years and its still working fine....i leave the radio on ..never turn off past 7years...thats approx 60000 hours

      it uses very little power just a few watts i would imagine that may have something...
      09-14-2024, 03:30 AM
    • Loading...
    • No more items.
    Working...