Cement resistor swap in Harman Kardon AVR

[PowellSkier]

Would I be able to swap a 0.27 Ohm Kx2 5W resistor for a 0.22 Ohm Jx2 5W resistor in a Harman/Kardon AVR? Cement type.

[eccerr0r]

If you really have nothing else, yeah you probably can. Due to ambiguity in the English language you could either lose a bit of speaker protection or power output.

[stj]

make sure you dont replace a metal oxide ceramic with a wirewound ceramic!

[PowellSkier]

Nope, just the big white sign-post looking thing, with 3 legs.

[R_J]

That is likely the dual emitter resistor, it may upset the output if you only replace the one section, and it should be with the correct value