Marantz PM 25 - looking for potentiometer RM050 / M50KC

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mikkele86
    Senior Member
    • Apr 2017
    • 78
    • Danmark
    #1

    Marantz PM 25 - looking for potentiometer RM050 / M50KC

    Hello. im renovation a Marantz Console Stereo Amplifier PM 25.

    One of the potentiometer for the tone control is broken and im having troubles finding a replacement.

    I know its 50K ohm.
    i think its reverse log.
    and 6 pin. Stereo.

    The parts list says its a RS05030350

    Click image for larger version Name: 20240505_214742.jpg Views: 459 Size: 397.6 KB ID: 3270252 Click image for larger version Name: 20240513_210455.jpg Views: 149 Size: 422.2 KB ID: 3270253
    Tags: None
    • CapLeaker
      Leaking Member
      • Dec 2014
      • 8352
      • Canada
      #2
      Last time I needed a specific pot for a powered speaker that was unobtanium a couple of years ago I found a perfect replacement on Ali.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • ohren
          What problems could this blown cap cause in a Marantz SR5400?
          by ohren
          I'm looking at a vented C513 in a Marantz SR5400 (photo included), in the FR section on page 24 in the service manual (https://audiocircuit.dk/downloads/ma...400-avr-sm.pdf).

          R533 right below it in the photo is charred, but measures the correct value.

          1. I'm not familiar with amplifier circuits (at all — don't know the difference between classes, etc.) so I was wondering what problems would manifest from a supposedly non-operational C513? I didn't hear anything odd when testing the output channel with a speaker. Is there a simple test that can be done...
          c513 r533
          1 Photo
          10-21-2025, 09:02 AM
        • samson7point1@yahoo.com
          Help troubleshooting an audio problem with an RCA SGT-250 CED Player
          by samson7point1@yahoo.com
          The Problem: This player has a toggle switch to select between Stereo, Mono R, and Mono L. Regardless of the setting it outputs the sound to both the L&R audio jacks. In the Mono R position, the audio output level is normal (from both the L and R audio output jacks), in the Stereo position the audio output is about half the volume, and in Mono L, it's about 3/4 the volume. Something about putting it into Stereo mode is causing the volume to drop significantly and I can't figure it out.

          The player processes the audio signal using two different reference frequencies. The "R"...
          PW300S circuit diagram
          2 Photos
          04-30-2024, 11:22 AM
        • kodiac
          rx-750 pioneer stereo memory
          by kodiac
          I have rx-750 pioneer stereo and the stored radio stations in the memory does not stay in the memory very long.
          Does anyone know where the memory is located in this stereo and how it is powered up?
          It does not have a battery backup.
          Does the memory use a capacitor for its power supply?

          thank you
          11-22-2025, 05:49 PM
        • acedogblast
          [Marantz SR5012] Center channel keeps going into ASO/Overcurrent protection.
          by acedogblast
          First off I would like to thank this community as it has provided me with great information that has helped me greatly on my repair for this Marantz SR5012 AV receiver. I am creating this new thread as the other 2 that I have created here has had their original question/problem solved and I plan that this is the final thread on my repair. Please note that this is my first time repairing audio amplifiers so I may not be aware of common issues and things to know.

          Lets start at what I have done so far. Random speaker popping on all channels is fixed by replacing the 2 large filter...
          03-01-2023, 08:24 PM
        • Mark R
          Marantz Model 150 Tuner "NULL" Adjustment..
          by Mark R
          I am not ashamed to say this is my first FM alignment I have ever done. I am well versed in electronics and repair. Been doing it for many years on Pro Audio Live sound equipment. Worked on Power amps EQ's musical gear and Large format Mixing Live consoles Etc. But now I can see this is a whole different world when it comes to tweaking this kind of gear. I do have the proper gear like the SENCORE SG 80 and HP Generators and Scopes Etc.

          Look below at Adjustment 12:8. The Null adjustment. I have a Heathkit IM-28 VTVM that was rebuilt and has new Burned in tubes that I used for this...
          12-30-2024, 03:18 PM
        • Loading...
        • No more items.
        Working...