Hello all. Im repairing this unit for a friend. He states that the receiver wont*power*up at all.*I have dc 5v standby to the glass panel and can use my camera phoneto see the ir working under the unit near the ir remote pickup butno*lights whatsoever and buttons will not respond. I only have the receiver and*no*speakers or accessories. When I plug it in I get a click from the*power*supply relay. Thats it.*I'm assuming I'm getting DC filtering from the bridge rectifier or I wouldn't be getting 5 volts to the glass panel or be able to see the IR working underneath the unit. when I receive the unit the glass panel was removed in there were some grounds coming off the main transformer disconnected. When I reconnected them to the frame of tge chassis and plug the unit in I finally have a clicking on the relay. Do I need to have the components connected to this unit in order for it to achieve stand by and us power up by hitting the button.
Any ideas would be greatly appreciated.
Any ideas would be greatly appreciated.
Comment