Kenwood DNX6990HD service manual needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tibimakai
    Badcaps Legend
    • Jan 2012
    • 3680
    • USA

    #41
    Re: Kenwood DNX6990HD service manual needed

    It is not exactly the same.
    I have only the DNX7190HD/DNX9990HD, but I believe that most of it, is the same as the DNX6990HD. They are just higher end ones, with more options on them.
    They were other models from the same generation, like the DNX5190HD, DNX6190HD.
    They are from the same year(same generation) though.
    Attached Files
    Last edited by tibimakai; 10-14-2017, 12:12 PM.

    Comment

    • redwire
      Badcaps Legend
      • Dec 2010
      • 3910
      • Canada

      #42
      Re: Kenwood DNX6990HD service manual needed

      Any sources for
      DNX891HD, DNX7710BT, DNX771HD, DNX691HD, DNX571HD, DNX571EX, DNX5710BT service manual?

      Comment

      • tibimakai
        Badcaps Legend
        • Jan 2012
        • 3680
        • USA

        #43
        Re: Kenwood DNX6990HD service manual needed

        I only have the 570.
        You can most likely you can buy them from pacparts, or kenwoodparts. I have purchased these, for $20/each.

        Comment

        • redwire
          Badcaps Legend
          • Dec 2010
          • 3910
          • Canada

          #44
          Re: Kenwood DNX6990HD service manual needed

          I could not find any service manuals offered:
          DNX571HD search at PacParts
          Kenwoodparts.com
          store.kenwoodusa.com

          I'll try hit them up for it.

          Comment

          • tibimakai
            Badcaps Legend
            • Jan 2012
            • 3680
            • USA

            #45
            Re: Kenwood DNX6990HD service manual needed

            You may have to ask them and most likely they will have it.

            Comment

            • Djtrance2008
              New Member
              • Dec 2017
              • 3
              • United states

              #46
              Originally posted by tibimakai
              I only have the 570.
              You can most likely you can buy them from pacparts, or kenwoodparts. I have purchased these, for $20/each.
              Hi so you have dnx570hd service manual I could really use it

              Comment

              • tibimakai
                Badcaps Legend
                • Jan 2012
                • 3680
                • USA

                #47
                Re: Kenwood DNX6990HD service manual needed

                Keep forgetting to find the disc, sorry, I will look for it, one of these days.

                Comment

                • tibimakai
                  Badcaps Legend
                  • Jan 2012
                  • 3680
                  • USA

                  #48
                  Re: Kenwood DNX6990HD service manual needed

                  Here it is, sorry for the delay.
                  Attached Files

                  Comment

                  • redwire
                    Badcaps Legend
                    • Dec 2010
                    • 3910
                    • Canada

                    #49
                    Re: Kenwood DNX6990HD service manual needed

                    been looking for this for a long time, thanks

                    Comment

                    • tibimakai
                      Badcaps Legend
                      • Jan 2012
                      • 3680
                      • USA

                      #50
                      Re: Kenwood DNX6990HD service manual needed

                      You were looking for the 571, no?
                      But I'm glad that I can help. You could have said something, because I had this for quite a while. I have purchased it, from pacparts.

                      Comment

                      • Djtrance2008
                        New Member
                        • Dec 2017
                        • 3
                        • United states

                        #51
                        Re: Kenwood DNX6990HD service manual needed

                        Omg thank u so much tibimakia

                        Comment

                        • mendezjonathan
                          New Member
                          • May 2018
                          • 6
                          • venezuela

                          #52
                          Re: Kenwood DNX6990HD service manual needed

                          good greetings
                          I'm looking for a dnn991hd manual ... or how to enter the hidden menu to reset the software.
                          I have a problem with the user

                          Comment

                          • tibimakai
                            Badcaps Legend
                            • Jan 2012
                            • 3680
                            • USA

                            #53
                            Re: Kenwood DNX6990HD service manual needed

                            Most likely, you will need a service manual.
                            On these Android based receivers could be two passwords, one that every stereo could have, but with these there could be another one, Route Collector online credentials as well.
                            Think as with iCloud credentials, for an iPhone.
                            I have the same stereo in my car, by the way.
                            http://www.pacparts.com/model.cfm?mo...tion=list_part
                            Last edited by tibimakai; 07-06-2018, 07:54 PM.

                            Comment

                            • mendezjonathan
                              New Member
                              • May 2018
                              • 6
                              • venezuela

                              #54
                              Re: Kenwood DNX6990HD service manual needed

                              thank you for attending my request,
                              the problem is the following I can not enter the operating system,
                              I have done the reset for the red triangle but the unit continues entering the menu of the photos ...
                              the person who sold me the unit told me the password of the user "batking" and with this user and password I enter the "route collector" page, but I can not access the system of the unit ..
                              It tells me that the password is incorrect or the service is not active.
                              I have asked the Kenwood service and they tell me that I must take the unit to the technical service so that with a code they can restart the unit.
                              Is it possible to access the system in another way?
                              Do you have another way of hard reset?
                              Attached Files

                              Comment

                              • tibimakai
                                Badcaps Legend
                                • Jan 2012
                                • 3680
                                • USA

                                #55
                                Re: Kenwood DNX6990HD service manual needed

                                Unfortunately I don't know much about this.
                                You can try asking here, maybe somebody can help.
                                https://forum.xda-developers.com/sho....php?t=2268599

                                Comment

                                • mendezjonathan
                                  New Member
                                  • May 2018
                                  • 6
                                  • venezuela

                                  #56
                                  Re: Kenwood DNX6990HD service manual needed

                                  ok thanks for the information I will try to look to see if I solve my problem

                                  Comment

                                  • Djtrance2008
                                    New Member
                                    • Dec 2017
                                    • 3
                                    • United states

                                    #57
                                    Originally posted by tibimakai
                                    Here it is, sorry for the delay.
                                    Thank you so much I have the dnx891hd service if you need

                                    Comment

                                    • tibimakai
                                      Badcaps Legend
                                      • Jan 2012
                                      • 3680
                                      • USA

                                      #58
                                      Re: Kenwood DNX6990HD service manual needed

                                      Thanks, for the offer. I have never had that model yet, but if I will have one, and need for service manual, I will be contacting you.
                                      I have issues, with my wife's 570, though. It turns on(fan is on), red triangular LED is on and the LCD backlight is turning on only.
                                      Not even sure, where to start with it.

                                      Comment

                                      • mixmansc
                                        New Member
                                        • Apr 2014
                                        • 4
                                        • USA

                                        #59
                                        Re: Kenwood DNX6990HD service manual needed

                                        More possible info here - https://www.badcaps.net/forum/showthread.php?p=935350

                                        I found a Kenwood updater that is not their normal firmware update. It reloads everything on a few models including the 570HD.

                                        Comment

                                        • Shepherd
                                          New Member
                                          • Feb 2013
                                          • 1
                                          • Canada

                                          #60
                                          Re: Kenwood DNX6990HD service manual needed

                                          Anymore updates to this issue? Have the same model that is stuck in reboot. Took a heat gun to the board and now it works normally but only for about 5 minutes then goes into reboot. If I unplug it for a few hours works for 5 minutes then reboot and if I restart it without waiting goes straight to reboot.

                                          Comment

                                          Related Topics

                                          Collapse

                                          • iR0ck
                                            LG 38gl950g Service Manual needed
                                            by iR0ck
                                            Hello everyone. Could anyone please share the service manual for the LG 38GL950G monitor? I have been using it for four years and just noticed that the PCB fan has never worked. The self-test also shows an error. It would be great if I could repair it somehow.
                                            12-01-2024, 07:20 PM
                                          • ngml
                                            Repair of an LG split AC system indoor unit PCB
                                            by ngml
                                            I am trying to repair an LG split AC indoor unit, which does not start and gives a CH05 error code.
                                            This indicates an error in the communication between the outdoor and the indoor unit.
                                            The outdoor unit is fine, so the problem is the indoor PCB.
                                            The indoor unit is an LG PC09SQ NSJ (3SNM09JA2FA), and the PCB has the following type number: EAX35907219-1.2 (see photo1)
                                            I changed optocouplers ICO1X & ICO2X and the NPN transistor S9013 which drives optocoupler ICO2X (see photo2), but this did not remedy the fault.

                                            Does anybody have the schematics of this board,...
                                            02-01-2025, 12:55 PM
                                          • magik20
                                            Wine Enthusiast 170 Bottle N'Finity Wine Cellar Model # 273 02 70
                                            by magik20
                                            Hi everyone,

                                            I'm hoping someone might be able to offer some guidance on repairing a Wine Enthusiast N'finity 170 bottle wine cellar, model 273 02 70.

                                            I recently acquired this unit for free via Facebook Marketplace, hoping to fix it up as a gift for my wife. I have some basic electronic skills (comfortable with a multimeter, basic soldering, identifying components) but I'm definitely not an advanced technician.

                                            The main challenge is that when I picked up the unit, the main control/power board had already been removed and the previous owner said it needs a...
                                            04-30-2025, 04:46 PM
                                          • rabbituk
                                            Sony HCD BX7700dbi CMT flashing standby
                                            by rabbituk
                                            I have got a Sony HCD-BX7700dbi that isn't worth a lot but I'm keen to learn how to repair and would appreciate some help with my train of thought. The protection circuit is kicking in and the standby light is blinking. It goes into protection mode within a second of powering it on.

                                            So far the relay on the power board that enables the main transformer clicks on and then off when powering on the unit. Looking at the schematics, the permanently enabled power rail called 'unreg sub' provides about 13.5VDC. Where the power comes into the main board on connector CN303, there is a diode...
                                            02-11-2025, 05:05 PM
                                          • wrand003
                                            Samsung MX-JS9500 Schematics Needed
                                            by wrand003
                                            Hello Everyone,

                                            I am working on a Samsung MX-JS9500 Giga Party Stereo System. I am specifically insearch of the Main Board Schematics.

                                            The Problem:
                                            The unit is not powering up the Bluetooth or CD player. The rest of the unit acts like everything is working fine. When you press the bluetooth button the unit says "please wait" while it tries to start the bluetooth but it never starts. The same thing happens with the CD player. There is no response it will not open the tray or close it. It just says "Loading."

                                            My suspicion...
                                            12-31-2021, 11:59 AM
                                          • Loading...
                                          • No more items.
                                          Working...