I would like to use the ST TL072CN OP amp and create a one channel mixer. I have an external variable power supply. I hooked up the op amp to my cd player and out of the op to a powered speaker and was able to play music but it had alot of distortion. I guess cause I dont have any capacitors or resisters connected. Can someone explain what the resistors and capacitors would do in circuit and why I would need it and where I would place them in circuit.
-
-
Re: ST TL072CN OP Amp connectivity
Can we see your diagram so I can tell what is going on? Are you using BI-polar power supply?
This is great website for DIY audio project:
http://sound.westhost.com/projects.htmNever stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809 -
Re: ST TL072CN OP Amp connectivity
Sorry I don't have a diagram. I used the pin outs below.
1 - Output 1
2 - Inverting input 1
3 - Non-inverting input 1
4 - VCC-
5 - Non-inverting input 2
6 -Inverting input 2
7 - Output 2
8 - VCC+
I connected my cd player to pin 5 as positive and pin 6 as negative. I used pin 7 from the op to my powered speaker and heard music but it was distorted. Also where would I would I hookup a potentiometer for volume?Comment
-
Re: ST TL072CN OP Amp connectivity
No feedback resistors, coupling caps, nothing? It is not that simple.
Please see the web site I provide to get basic understanding first.
Last edited by budm; 07-13-2012, 04:22 PM.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809Comment
-
Hello everyone !
I recently conducted maintenance on a Hitachi DA-6000 CD player for my grandparents : it had two distinct issues.
Feel free to share your experience if you ran into other issues.
DISCLAIMER : BE VERY CAREFULL WHEN OPERATING ON THIS SYSTEM : THE HIGH VOLTAGE IS VERY CLOSE TO THE VARIOUS TESTING POINTS, PROCEED WITH CAUTION
CD tray would not come out of the player
I could hear a motor spinning inside the player but the CD tray would not come out.
Turned out that the issue was the CD tray belt that aged poorly and began to...11-05-2025, 03:11 AM -
This specification for the MEDION AKOYA S15447 + ext. DVD Player Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the S15447 + ext. DVD Player boardview and S15447 + ext. DVD Player schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any...09-06-2024, 05:30 PM
-
Hi All,
I am working on Bose Wave Music System AM/FM CD Player Model AWRCC1. Suddenly NO AUDIO at all. Not from the AM/FM Radion & neither through the CD Player. I used the headphone, still no sound. Opened the unit & checked the motherboard to see any shorts or any blown components but all seem to be in a very good condition. The test of both speakers are fine & they work well. The display seems to be ok as I see when I switch over between radio/CD with teh remote control & the time shows good. Does any know what could be the problem or any kind of repair tips &... -
Hello!
My mother has a Victrola Navigator player that stopped functioning after a storm. I checked out what I could - all player functions appear to work, but there is no audio output in either the speakers or the headphone jack. I suspect (with my limited knowledge) that the amplifier part of the device is toast. Photo of the suspected board is attached. There's separate boards for front display, record player, etc. This board has a section for power regulation and a section for amp. There's a UTC7266 7+7W dual bridge amplifier IC and a CSC2314F sound processor IC on the board. Visually,... -
[Apologies if this is the wrong place for this]
I've a small (7"?) W8 tablet that I use as a media player in the office (I never know which workstation I'll be using so this lets me export the music to a "common point"/appliance from which it can be player).
But, the music player application (MS?) is obviously designed for a desktop machine -- all of the controls are tiny (on a 7" screen) instead of being "finger sized (consistent with a touch screen).
I'm looking for alternatives. Big buttons. Support for album artwork (so I can...
Comment