HSM shredstar S10 document shredder issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • shybear
    Senior Member
    • Jan 2010
    • 113
    #1

    HSM shredstar S10 document shredder issue

    This machine has an optic sensor problem. When the machine power ON the motor start to work and stop when a sheet is inserted.
    This shredder documents come with two slits and each one has an infrared photo sensors couple (black + white LED).
    Making some cross test I've found that one of Led photosensor isnt't working.
    Is there a way to understand the right LED photosensor have to buy?
    For reference I attach a picture of the broken photoled. (5mm. type)
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 31283
      • Albion
      #2
      just get whatever is cheapest - like the makers do.
      if in doubt - just get a new led too that runs at the same wavelength.

        Comment

        • shybear
          Senior Member
          • Jan 2010
          • 113
          #3
          ok, thanks, I've seen that its also possible to buy photoled couples (emitter + reciver) so to be sure that both run at same wavelenght.

            Comment

            • stj
              Great Sage 齊天大聖
              • Dec 2009
              • 31283
              • Albion
              #4
              aliexpress has good deals,
              i got 10 matching pairs of 3mm emitters and diodes for about €2

                Comment

                • shybear
                  Senior Member
                  • Jan 2010
                  • 113
                  #5
                  Yep I was looking here too😉

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • rounin
                      MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
                      by rounin
                      Hi everyone,

                      I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

                      🛠 Original Issue
                      The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
                      Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

                      I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

                      ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
                      04-19-2025, 01:18 AM
                    • ugamazing
                      Three 820-01700 32GB Logic Boards Same Issue: Won't Wake From Hibernate
                      by ugamazing
                      I have three identical-spec 820-01700 boards (2.6/32/512), and ALL THREE boards came to us with the same fault, from different sources: The boards don't wake from hibernation with the keyboard or lid, they ONLY wake when you press the power button. I understand this is a very minor issue, but the boards must be fixed!

                      We will of course begin with the obvious (checking lid signals), but I couldn't help but notice these three boards were all 32GB variants. Has anyone noticed an issue relating to these 32GB boards in particular? I of course don't think it's a RAM issue, but it's bizarre...
                      12-17-2024, 07:05 PM
                    • shahnld
                      Lenovo legion 5 pro startup issue
                      by shahnld
                      Good day Experts
                      I have a lenovo Legion pro 5 16ACH6H with AMD RYZEN 7 5800H and RTX3070,.

                      A weird issue has troubled me. If i power on off the laptop 20 times then only power LED will lit but no fan spin no display. At this stage gpu, vram. DDR voltage. 5v 3.3v 1.8v and the rest are present and cpu core is stuck at 0.84v.

                      And sometimes lets say the 21st time it will boot perfectly and there is image and everything is working perfectly and at this stage i see cpu core...
                      08-24-2025, 12:31 PM
                    • ahmarzo
                      Acer laptop battery draining issue
                      by ahmarzo
                      Have a acer laptop ex215-22 with motherboard part no daz8emb18a0 the issue is the battery gets drain overnight upto 25-30 percent even when switched off / shutdown.even after ssd is removed and laptop off with button the battery keeps draining.i have updated the bios but same issue have tried another new battery and the charging works fine only issue is battery is discharging when connected to motherboard in off condition.
                      Help me to diagnose this issue as there is no shortage in the inputs MOSFET
                      08-02-2025, 06:39 AM
                    • elmark
                      HP 15-cw1002ua strange keyboard issue
                      by elmark
                      HP Pavilion 15-CW1002UA
                      S/N 5CD0251CBC
                      P/N 7KE54EA

                      Hello guys!
                      I have a strange issue with my laptop keyboard and I'm lost trying to detect what's wrong - the KB9028Q-C or the keyboard itself.
                      It powers on OK and has no other issues except the following:
                      • CAPS LOCK does not work at all
                      • Fn button toggles Flight Mode
                      • When I press 't' or '5', it produces 't5', and when I press 'y' or '6', it produces 'y6'
                      • (with SHIFT pressed: 't%' and 'y^' respectively)
                      I initially thought it was a keyboard malfunction (internal short, etc.),
                      but when I press and hold...
                      06-27-2025, 01:10 AM
                    • Loading...
                    • No more items.
                    Working...