DDR2 resistor packs... 0804?

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • eccerr0r
    Solder Sloth
    • Nov 2012
    • 8694
    • USA
    #1

    DDR2 resistor packs... 0804?

    Are those typical resistor packs on DDR2 modules 0804 (2010 metric?) 22Ω x 4?

    Wondering what I need to buy if I can't find a sacrificial board with one... which will be annoying if I only need one, just like buying 1 resistor, except I'd be buying 4...
    Tags: None
    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 30977
      • Albion
      #2
      Re: DDR2 resistor packs... 0804?

      buying 4??
      you'l be lucky - last time i needed arrays like that i had to buy a bag of 100

        Comment

        • mon2
          Badcaps Legend
          • Dec 2019
          • 13944
          • Canada
          #3
          Re: DDR2 resistor packs... 0804?

          https://www.arrow.com/en/products/tc...C124-JR-0722RL

          We currently have free shipping with Arrow - if interested, send us a PM and can have them drop shipped to you for free. They are not that expensive.
          Last edited by mon2; 04-15-2021, 05:20 AM.

            Comment

            • eccerr0r
              Solder Sloth
              • Nov 2012
              • 8694
              • USA
              #4
              Re: DDR2 resistor packs... 0804?

              I'm not that used to working with SMT, hoping that device really is 0804?
              Was looking on my other devices and couldn't find a matching device, would be very sad if I ordered a device and it wasn't the right size...

              Oh, and yeah since these packages hold 4 resistors a piece...so can you just order 25 to hit 100?

              And thanks for the offer mon2, but I have some other stuff I'd like to order so might end up adding it to my other "wishlist" to soften the shipping shock. Yeah this does suck. Hate SMD, mainly because I don't have a stockpile of replacement parts...
              Last edited by eccerr0r; 04-15-2021, 10:37 AM.

                Comment

                • Lisa Su
                  Badcaps
                  • Apr 2021
                  • 213
                  • Taiwan
                  #5
                  Re: DDR2 resistor packs... 0804?

                  I'm not that used to working with SMT, hoping that device really is 0804?
                  Just double checked here. Think you're right!

                  https://i.imgur.com/G049R52.png
                  https://i.imgur.com/7fXgewT.png

                    Comment

                    • eccerr0r
                      Solder Sloth
                      • Nov 2012
                      • 8694
                      • USA
                      #6
                      Re: DDR2 resistor packs... 0804?

                      Oh nice, BOM!

                      Thanks, yeah looks like 0804's so if it comes down to ordering from mouser or something, that's what I'll need to order. Else I may just swipe one from that dead PC3200 512M...

                        Comment

                        • petehall347
                          Badcaps Legend
                          • Jan 2015
                          • 4426
                          • United Kingdom
                          #7
                          Re: DDR2 resistor packs... 0804?

                          i always check with calipers for sizes

                            Comment

                            • eccerr0r
                              Solder Sloth
                              • Nov 2012
                              • 8694
                              • USA
                              #8
                              Re: DDR2 resistor packs... 0804?

                              Yeah with so little room for error i worry about precision of my calipers and especially the lead-to-lead dimension where solder might affect the measurement.

                              And then the conversion from imperial to metric and back when needed... I'm always worried about my imperial-only calipers...

                                Comment

                                Previous template Next

                                Related Topics

                                Collapse
                                • jinu_j
                                  Dell 2209WA - power supply - Fusible Resistor replacement
                                  by jinu_j
                                  Hi

                                  I am trying to repair an ancient Dell 2209WA Monitor which suddenly shut off with a pop sound. On investigation found that one of the fusible resistors had blown. Further investigation identified multiple components as faulty because of which the fusible resistor blew. Please refer the attached circuit diagram showing the components that were found to be damaged.

                                  1. FR950 - blown fusible resistor - 0.2 Ohm 1W
                                  2. Q950 - shorted Q950 MOSFET - 650V 10A N Channel Mosfet
                                  3. R835 - Blown Resistor - 20KOhm SMD resistor
                                  4. D930 - Shorted Schottkey Diode...
                                  05-03-2025, 10:51 PM
                                • mikey5791
                                  Need help to replace burned resistor in 350w atx psu
                                  by mikey5791
                                  Hi to all forum members,

                                  Got this faulty 350 watt atx psu dirt cheap from a local online seller as i am keen to use it as a learning tool to repair faulty power supply.
                                  The faulty part is quite obvious from the burn area near the 16pin KA7500 BD pwm. The fuse is still intact with good continuity.

                                  Upon power on ac, there is 5vdc standby power on cathode of diode D14 and about 10vdc on cathode of diode D13.(This should be the aux power to generate the 12v and 5v rail.)
                                  Initially i replace the two burned resistors near my marked red arrow to 200 ohm resistor...
                                  12-26-2024, 04:55 AM
                                • MidnightRoller
                                  Can a resistor lose resistance after hot air?
                                  by MidnightRoller
                                  I am curious if a 0402 resistor could go from 43 ohm to 0. In electronics class and my experience a resistor can degrade and gain resistance all the way up to not being able to conduct at all. I have never heard of a resistor decreasing in resistance and becoming 0 ohm or a dead short… that's not the direction they fail… or so I thought.

                                  I was attempting to remove a wson8 chip on an iMac motherboard and it required a lot of heat, on one side of the chip were 3 0402 resistors that were very close. I popped the chip out unintentionally out of the tweezers and sent those resistors...
                                  02-02-2022, 11:46 PM
                                • artvandalai
                                  What resistor ohm will work better to repair this waterpik?
                                  by artvandalai
                                  The resistor on this waterpik blew. I changed it with the a similar spec 47ohm 2 watt yageo resistor but it still keeps blowing the resistor. Checking with the multimeter the motor, capacitor, diodes, and thermal fuse all checked normal. Will a higher ohm resistor work better? What ohm resistor will work better to repair this waterpik? This video is showing the repair with a 56 ohm resistor https://www.youtube.com/watch?v=_J7_rV7ui1Y
                                  3 Photos
                                  01-05-2025, 04:10 PM
                                • chth96
                                  Is it okay to replace 1/2 watt resistor with 1 watt resistor in AC/DC adapter?
                                  by chth96
                                  I have purchased an 100-240v AC/5v 2a DC adaptor from aliexpress,and a month ago It smelled burning when I plugin it powerstrip.
                                  Since then, This AC/DC adaptor have been out of order.
                                  But A few days ago,I replace 0.5 watt resistor with 1 watt resistor(1ohm) in this adapter.
                                  After replacing resistor,It succeed to recharge all of android phone.And When I measure voltage on the two pins of USB port,It shows 5.5v
                                  Is it okay to replace 1/2 watt resistor with 1 watt resistor in AC/DC adapter?
                                  And Is there any possibility that it will suddenly explode as well as to be out...
                                  12-03-2023, 04:40 AM
                                • Loading...
                                • No more items.
                                Working...