BGA153 eMMC Chip Writer Needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • GMAN-2022
    New Member
    • Mar 2021
    • 2
    • USA

    #1

    BGA153 eMMC Chip Writer Needed

    Hello,

    I have a home automation controller (Control4) where the eMMC chip where some sectors on the chip is corrupted. The controller runs a linux based system. I believe the bootloader/kernel is bzImage.

    The model of the eMMC is SanDisk SDIN8DE2-8G.

    My objective is to purchase a new SanDisk eMMC chip and flash a working image on the eMMC chip before I take the circuit board to the local electronic shop to remove the old chip and install the new chip. I have confirmed with the local electronic shop that they are able to remove and install the new eMMC chip on the circuit board.

    Can someone recommend the most economical BGA153 eMMC writer that is capable of writing a Linux image to a raw eMMC chip.

    Thanks
    Last edited by GMAN-2022; 03-23-2021, 07:05 PM.
  • mon2
    Badcaps Legend
    • Dec 2019
    • 14498
    • Canada

    #2
    Re: BGA153 eMMC Chip Writer Needed

    You could try some of the offshore solutions like:

    https://www.hklrf.com/eMMC-BGA153-BG...Test_4476.html

    Best to ask if it is suitable for your project.

    Comment

    Related Topics

    Collapse

    • DynaxSC
      ASRock B650M PRO RS - BIOS CHIP 25Q256JW BLOCKED BY STATUS REGISTERS
      by DynaxSC
      Hi

      I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
      The SPI chip is an Winbond 25Q256JWEQ model (1V8).
      The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
      The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.

      I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6...
      08-04-2025, 12:20 PM
    • Ardent1
      Lenovo IdeaPad 3 15IIL05 81WE New Blank Chip - help needed
      by Ardent1
      Hello everyone, I have never flashed a bios before and currently find myself needing to flash a new Winbond W25Q128JVSQ chip without the original bios file.. I have a CH341A programmer and have been able to connect the chip to neo-programmer, but that's about as far as my knowledge takes me so far. When i read the chip the data appeared to be all FF for every entry.
      I do not know the history of the motherboard, only that the old chip was removed because it was dead apparently. When the on button is pressed, the laptop on battery alone just shows a solid white light on the side and same on...
      12-18-2024, 02:52 PM
    • acedogblast
      Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
      by acedogblast
      This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

      There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
      11-02-2024, 05:13 PM
    • Troystain
      Help EZP2023+ updated chip database for w25q256jveq?
      by Troystain
      Hello, anyone here have updated ezp2023+ chip database in .dat file format.

      I need to add w25q256jveq chip but I do not know what data should I type.

      I'm using the ezp chip dabase editor posted from here https://www.badcaps.net/forum/troubl...ro-programmers

      The currenty unit model that I am trying to detect is HP elitebook 640 g9 which is currently locked on admin bios....
      11-25-2024, 12:53 AM
    • trepachka
      Help identifying a chip for Lenovo Slim 7 16IAH7 - schematics needed
      by trepachka
      I have this Lenovo Slim 7 16IAH7 notebook that is not booting properly. All voltages are there: 5v, 3.3v, 1.8v but it's still a no-go.

      I spotted this IC chip with markings "6611c" on it. The coil near this chip measures around 200 Ohms which I think is too low. But without the schematics, it's just a guess.

      I wonder if someone has the schematics for this board or perhaps, can help me identify this particular ship. Thanks....
      08-08-2025, 02:04 AM
    • Loading...
    • No more items.
    Working...