I ended up with a Sony PMW-EX3 that was in a pretty nasty fall. At this point I've repaired everything but the wire harness that brings video to the LCD viewfinder. It's this bundle of several dozen wires 0.3mm in diameter that has one clearly broken wire and several others either questionably intact or with damaged insulation. I can splice them but I have no idea how to insulate the repairs.

The smallest shrink tube I have only reduces to about 0.8mm and wouldn't work. The harness can't have the wiring completely replaced due to the special crimped ends and so far the best I've gotten out of Sony is that they no longer sell replacement parts for this model camera anymore.

The smallest shrink tube I have only reduces to about 0.8mm and wouldn't work. The harness can't have the wiring completely replaced due to the special crimped ends and so far the best I've gotten out of Sony is that they no longer sell replacement parts for this model camera anymore.
Comment