How to Add Profit to Your Business by Adding Microsoldering

capwizard

Badcaps Legend

Join Date: Jun 2016

Posts: 1991

Country: USA
#1

How to Add Profit to Your Business by Adding Microsoldering

12-14-2016, 08:55 AM

How to Add Profit to Your Business by Adding Microsoldering

If 4 kids stay-home mom can do it SO CAN YOU!

Introduction to Microsoldering with Jessa Jones
https://www.youtube.com/watch?v=A0OiT9e_JXk

Microsoldering with Jessa Jones : Meet Jessa
https://www.youtube.com/watch?v=xFqA9u6y0Fk

Hakko FM-2032/FX-951 review, micro pencil soldering iron & station.
https://www.youtube.com/watch?v=WgoGhnlJHas

Pic: This is my 6 year old beaten up Amscope. a good helper!

Then I add one more mess Pic you will feel much better.
Attached Files

Last edited by capwizard; 12-14-2016, 09:28 AM.
Tags: None
stj

Great Sage 齊天大聖

Join Date: Dec 2009

Posts: 30979

Country: Albion
#2

12-14-2016, 09:01 AM

Re: How to Add Profit to Your Business by Adding Microsoldering

i thought my stuff was a mess - i feel pretty good now!!
Comment
capwizard

Badcaps Legend

Join Date: Jun 2016

Posts: 1991

Country: USA
#3

12-14-2016, 10:12 AM

Re: How to Add Profit to Your Business by Adding Microsoldering

Really I thought I just clean it up years ago!!

Last edited by capwizard; 12-14-2016, 10:13 AM.
Comment

Previous template Next

Adding/unlocking CPU support for an HP EliteOne 800 G2 AIO

by NecroFlex

I bought a used HP EliteOne 800 G2 All in One PC, that has an i5 6500 in it with BIOS updates going into 2023. The Chipset in the AIO is a Q170, so in theory it should support 7th gen.

HP site only shows a few 6th gen supported, when i inserted an i7 7700k (dead mem. A channel, but would be good in the AIO since i can just put a single 16GB stick in there) with the newest 2.60 bios, the AIO powered on and beeped/flashed an error code for the RAM (3 long 2 short) in the first ram slot and in the other slot it powered on, restarted and then stayed on a blank screen.

I'm...
- Channel: BIOS & Schematic Requests!
02-22-2024, 11:56 AM
Adding a clock battery to action camera to retain date&time when changing batteries Campark X25

by flat-earther

I have a cheap action camera with an annoying trait, every time I change batteries the date & time gets reset and I have to set it again.

To solve this problem I want to add a small internal battery inside it which will keep supplying power to the camera for a while while I change batteries so the date & time is retained.

I have opened the camera and I think there is enough room to add something inside to accomplish this:

The camera is powered by a 3.7V nominal single cell lithium ion battery.
So I need to connect another battery in...
- Channel: Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
06-08-2025, 02:00 AM
pin Setting parameter line or set lines menu for adding ITE5571e on RT809F programmer

by joelz

Hi, sorry if i here to request if anyone know number of pin to set lines for reading ITE7751e on RT809F..i try to see on schematic but i dont know how to choose it..pleasee..
- Channel: Schematic Requests ONLY!
11-18-2024, 06:02 AM
Asus X415ea Adding a Keyboard with Backlight

by obdcart

Hello my friends i hope you can help me, i have just replace a keyboard with non backlight on a Asus X415 Laptop and i already install a Keyboard with backlight, the motherboard has the conector and ic's to control the light but i doens't work, i already try with a new installation of Windows and it's the same and injecting 3v/5v to the backlight flex it turns on the light, i think must be disable on Bios or need a jumper configuration.

I hope you can give me some help

1 Photo
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
06-28-2024, 02:21 PM
Adding Bluetooth module to Woofer buzzing noise

by Orion Bardier Skylar

Hi, I got this Woofer,Name TBT, which damaged its Radio module, then was added a Bluetooth module from the market(history from client). Then recently was brought to me with very low sound and heating problem. I changed subwoofer Speaker which had impedance of 1.2 instead of 4ohms rms and the bass ic KA2206B. Sound is back but buzzing and hissing sound present even when muted. How can I get rid of it?
- Channel: Troubleshooting Audio Equipment
03-06-2024, 02:35 PM
Loading...
No more items.

How to Add Profit to Your Business by Adding Microsoldering

How to Add Profit to Your Business by Adding Microsoldering

Comment

Comment

Related Topics