Synology DS218

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wron
    New Member
    • Nov 2025
    • 5
    • Poland
    #1

    Synology DS218

    Hi everyone,
    This morning I noticed my Synology nas doesn’t turn on, opened it up and saw this component in a rather bad state next to 3R3 inductor, there are some shorts further down but maybe it’s this part. I need some help with identifying and trying to replace it, if it’s possible to find it
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • truclacicr
      Badcaps Veteran
      • Apr 2019
      • 356
      • australia
      #2
      What are the markings on U215? Maybe its datasheet will give us a clue.

        Comment

        • Agent24
          I see dead caps
          • Oct 2007
          • 5096
          • New Zealand
          #3
          Is that a QFN that only has pads on 3 of the 4 sides?

          I wonder if you can find the piece that blew off, it may still have the part number on it...
          "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
          -David VanHorn

            Comment

            • wron
              New Member
              • Nov 2025
              • 5
              • Poland
              #4
              I found a second device to look it up, part says MPJH 8632 197 E6, sadly no luck finding this part anywhere. Any help would be appreciated thanks
              Attached Files

              if you find these attachements useful please consider making a small donation to the site

                Comment

                • SMDFlea
                  Super Moderator
                  • Jan 2018
                  • 22241
                  • UK
                  #5
                  Originally posted by wron
                  I found a second device to look it up, part says MPJH 8632 197 E6, sadly no luck finding this part anywhere. Any help would be appreciated thanks
                  Monolithic Power MPQ8632
                  Attached Files

                  if you find these attachements useful please consider making a small donation to the site

                  All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                    Comment

                    • Agent24
                      I see dead caps
                      • Oct 2007
                      • 5096
                      • New Zealand
                      #6
                      How interesting, I have not seen an IC with this package style before
                      "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
                      -David VanHorn

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • H1ghl4nd3r
                          Synology DS218+ no power
                          by H1ghl4nd3r
                          This has same issue as the ds718+ no power and greened light stays on with new power supply
                          I'm going to change the 2032 cmos and see if this does anything, as the visual inspection did not pick up any holes in this chips on this motherboard.

                          There is a suspect place I noticed on pic 3, it looks out of place
                          Edit: Also found this on the U3 chip pic 4 and used microscope on pic 5



                          There are quite a few posts on this model again doing the same no power or it shuts down overnight, most seem to be the power supply but as mentioned this is...
                          10-15-2023, 03:34 AM
                        • taurtnt
                          Help identifying AMCH073 regulator or finding a compatible replacement
                          by taurtnt
                          Hi everyone,
                          I’m trying to identify a step-down regulator marked AMCH073. It’s used on the PEX power rail of a graphics card. I can’t find any datasheet or info online.
                          Here’s what I’ve observed:
                          • It has a QFN-16 footprint, similar to NB670.
                          • Pins 1, 2, 15, 16 are connected together and go to the inductor, so likely SW (switch node).
                          • Pin 9 is connected to GND, which doesn’t match NB670 (where pin 9 is SW).
                          • Pin 8 also seems to be tied to the same GND plane.
                          • The chip only says AMCH073, no manufacturer logo or other markings....
                          1 Photo
                          08-24-2025, 03:06 PM
                        • Bartoloni
                          Lenovo S145 -15iwl vcore inductor warm.. looking with oscilloscope there is a spike.
                          by Bartoloni
                          Hi, i have a Lenovo S145 that after 20 seconds shutdown and restart (it's working correctly on thse 20 seconds)
                          everything seems ok, but on Vcore inductor ( this is an i3 with just 1 switching power supply for CPU)

                          there is an output to teh CPU with a spike.. seems that inductor can't handle the input...
                          replaced the capacitor (330) and the inductor (R15) without any change
                          any idea? very thank you!

                          input of the inductor seems as usual... only strange thing is that the upper/lower voltages seems to be 21V (main power line is 19.3) ... but not sure this...
                          12-09-2024, 12:42 PM
                        • redbaron1007
                          Liquid damaged macbook A1466 fan spins, but doesn't turn on.
                          by redbaron1007
                          I got a tricky one today in the form of a macbook air A1466 820-00165-A that will recognize the charger and turn the light green then back to orange and the fan will spin constantly, but the system won't power on. The screen never turns on, it doesn't make the bong noise it's supposed to, and pressing the power button doesn't do anything. When I took the board out to visibly inspect it I only found one spot of corrosion on the bios IC. I pulled the chip, cleaned it and the area with IPA and put fresh solder on both and put the bios chip back on, but when I went to test it again it still does the...
                          10-24-2024, 05:45 PM
                        • badcap111
                          How to read inductor specs?
                          by badcap111
                          I have a broken samsung galaxy s10 with missing inductor. I want to replace the missing inductor and I have found some vendors. But I don't understand how to read the specifications of the inductor. The specs are:

                          INDUCTOR-SMD;470NH,20%,2520,T0.8,0.029OH

                          I understand that the inductor is 470 nH with 20% margin, and the size is 2520 or 1008 (imperial measure), but what do T0.8,0.0290OH mean? I can't find any explanation on the web.
                          09-12-2023, 01:25 PM
                        • Loading...
                        • No more items.
                        Working...