Samsung kills off plasma in favour of 4K LED-LCD, Curved UHDTV

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #1

    Samsung kills off plasma in favour of 4K LED-LCD, Curved UHDTV

    A sad day for plasma. Panasonic pulled out this March, Samsung announces they are stopping production at the end of November.

    Samsung didn't mention they were continuing with OLED, either. They are having major production problems with OLED TVs. The only large manufacturer of OLED TVs (the only type of display that could possibly compete with plasma) is LG, who will naturally increase the price due to lack of competition.

    So the mass market crappy technology wins out, a sad day.
    Last edited by tom66; 07-04-2014, 02:20 AM.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.
  • ddscentral
    Senior Member
    • Mar 2008
    • 151
    • Lithuania, EU

    #2
    Re: Samsung kills off plasma in favour of 4K LED-LCD, Curved UHDTV

    http://www.bbc.com/news/technology-28143408

    If I understand correctly, the main reason is that they currently can't make affordable 4K UHD plasmas.
    Panasonic said the same thing:
    http://www.hdtvtest.co.uk/news/4k-pl...1311133417.htm

    Comment

    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 30950
      • Albion

      #3
      Re: Samsung kills off plasma in favour of 4K LED-LCD, Curved UHDTV

      not that it matters,
      unless you live in mainland japan, there is no 4k content!

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Samsung kills off plasma in favour of 4K LED-LCD, Curved UHDTV

        Panasonic demoed a 58" 4K plasma, but the energy usage and manufacturing cost were too high to make it practical. Sad; I'd love to see the tech behind that!
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • withalligators
          Badcaps Veteran
          • Jun 2013
          • 267
          • USA

          #5
          Re: Samsung kills off plasma in favour of 4K LED-LCD, Curved UHDTV

          Dude, you just got a Kuro. You're good for plasma til they figure out OLED. I got a 2011 PN59D7000 working, and it's my new keeper. pretty disappointing black levels, but better than LCDs. I was hoping for inky, inky stuff.

          Mass market stuff always wins out. I still want my FED or SED display. Non-curved, thanks.
          Last edited by withalligators; 07-09-2014, 10:22 AM.

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #6
            Re: Samsung kills off plasma in favour of 4K LED-LCD, Curved UHDTV

            Eh... Samsung actually hit really good technology in their F8500 (2 years older than your set), and from what I've seen of the build quality I wouldn't hesitate to keep one of them myself. Unlike Pioneer, they actually use conventional drive technology (set up ramps and such) so most of the magic is in the panel. Same for Panasonic's ZT65 which has been called a "Kuro killer" because of its dark black levels (allegedly darker than a 9.5G Kuro) although brightness is slightly lower so overall contrast is poorer. F8500 is only slightly lighter than a Kuro but still a damn good panel.

            Pioneer had to "baby" their Kuro panels to get deep blacks with 5 adjustments on the Y drive and 2 on the X drive -- that's half the reason the red tint occurs after some time (although that can be fixed.)

            You can still see the black level on my tweaked Kuro in a dark room, but on virtually all content it's so dark it blends in with the TV's bezel.

            Reason I'm upset about the death of plasma is it'll make it harder to sell them on the used market -- and I'm familiar with the technology and prefer fixing them over LCDs.
            Last edited by tom66; 07-12-2014, 08:13 AM.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • withalligators
              Badcaps Veteran
              • Jun 2013
              • 267
              • USA

              #7
              Re: Samsung kills off plasma in favour of 4K LED-LCD, Curved UHDTV

              How are the cheap LG sets? They are at a price point where I imagine they will continue production until 4k is omnipresent. Their quality can't be all that ba as I've never found one in the ewaste bin.
              Last edited by withalligators; 07-12-2014, 06:50 PM.

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #8
                Re: Samsung kills off plasma in favour of 4K LED-LCD, Curved UHDTV

                Build quality is OK for LG plasmas, although they do have some issues with the "Razor Thin" sets damaging the panel ribbons. The newer 720p ones are pretty cheaply made. Black level is barely better than an LCD, and brightness is poor except on the high end 1080p models.
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • Mr.Orange
                  Member
                  • Aug 2014
                  • 12
                  • Ireland

                  #9
                  Re: Samsung kills off plasma in favour of 4K LED-LCD, Curved UHDTV

                  Originally posted by tom66
                  LG, who will naturally increase the price due to lack of competition.

                  So the mass market crappy technology wins out, a sad day.
                  Yeah they were already caught with the others setting the price, EU ruling had to reduce prices, but I wouldn't think increasing plasma prices now would benefit them, if anything cutting the prices to increase output as sole supplier, ie produce to little not cost-effective nor cost-effective to over produce.

                  .. ahhh Betamax.
                  -----------------
                  A simple cheap SMD airflow tool is a handheld gas soldering iron without the iron :. is a selective hot airflow which can be regulated by turning up/down gas, also no onerous air lead. I have replaced many components without damaging them or the solder pads all within seconds... can also be used as a soldering iron & on heat shrink
                  .----------------

                  Comment

                  Related Topics

                  Collapse

                  • ArMaaN376
                    Samsung PS51E550 Plasma TV
                    by ArMaaN376
                    Hello,
                    I am having Samsung PS51E550 Plasma TV. While the TV was working, a crackling sound heard & video went off with audio still ON. After switching it off & ON, the red LED on TV blinks six times & then off.
                    Opened TV cover & observed foll
                    a) Green LED on the small PCB blinks at @5-6sec ON & off for 3-4 secs. Red LED on logic board ON
                    b)Vs & Va on power supply board raises momentarily to 209v & 58v resp & then drops.
                    c) Cold test on Y-main board shows all 3 pins of FGPF4536 IGBT short to Grnd.
                    How to confirm Y -Buffer board...
                    06-19-2024, 04:05 AM
                  • jm1234
                    Panasonic plasma TX-P42ST50 - 6 blinks
                    by jm1234
                    Hi,
                    anyone able to provide the service manual for old plasma Panasonic TX-P42ST50E?
                    It turns off almost immediately (0~5 seconds after pressing the on/off button) and starts flashing the red diode 6 times.
                    I disconnected the left-hand side board (SC?, both the ribbon cable and the power cable to it) and also another ribbon going to bottom left board. Then the led signal is 8 flashes. According to service guide to another Panasonic plasma it would mean the left-hand side board is faulty. But I'm not sure it 100% applies to my model.
                    I checked that board for any obvious faults...
                    05-22-2024, 06:59 AM
                  • KYBOSH
                    Hitachi 55HDS69 55" Plasma TV - No Picture But Sound
                    by KYBOSH
                    Picked up a bahemoth plasma TV not too long ago and just now getting around to looking at it.
                    No picture but you hear the TV static (white noise) playing loud and clear.
                    The back was already taken off (and no screws were provided) as the previous owner had already taken a look.
                    But it seems they didn't get too far and just left it.

                    When I first took a look I was amazed at how pristine the inside looked.
                    Its as if the TV had been in a time capsule.
                    Caps looked like they were just pulled off the self.
                    Copper coils had no sign of corrosion on...
                    02-01-2023, 11:10 PM
                  • porfyriadhs
                    Samsung Plasma PS51D6900DS Bootloop
                    by porfyriadhs
                    Hello . I have a problem with a samsung plasma tv stuck in bootloop . The TV is Samsung PS51D6900DS plasma smart tv .Need help if anyone have any suggestions
                    Thanks a lot !!
                    10-19-2023, 11:31 AM
                  • Yanleb
                    Schematic or datasheet for Plasma TV buffer chip
                    by Yanleb
                    Hi all,

                    I'm interested in understanding how a buffer board chip is working. I know there's about 90 outputs per chip to the plasma panel, but I'm more interested to know about the input pins. I guess that some of them are address pins, but I want to know more.

                    So far I've found nothing at all. I haven't found any datasheet about the various buffer chips, and I haven't found any schematic for the buffer board using them (Y Buffer Board in Samsung's terminology).

                    Any information will make me happy. It can be from any buffer chip or plasma TV manufacturer....
                    05-18-2022, 01:36 PM
                  • Loading...
                  • No more items.
                  Working...