Hi, I'm looking for a data sheet or a quality IRVCM10A rectifier or equivalent , I can not find data sheets on this and the only place they sell it is at aliexpress and I am suspicious about there quality and at about $45.00 CAD I don't know if my wallet wants to take the risk.It is used in a Evinrude Etec engine management module ( EMM) P/N 586759
-
-
-
Thank you truclacicr , you made my dayComment
-
Hey John, Did you have any luck finding a replacement or with the datasheet of IRVCM10A o VSVCM10A,
ThanksComment
-
what is it for?
got any pictures?
Comment
-
55V rectifier on outboard ECUComment
-
19pins?
look at the pcb it was soldered to to see how they are grouped.
you should be able to work out the pinout that way.
Comment
-
I've had no luck on data sheets or part other than Aliexpress. I've read posts about purchasing this item and has a high failure due to quality. There must must be a factory in China that makes quality parts, I just don't know which ones they are.Comment
-
Hello everyone!
Recently I've noticed that some ShopJimmy backlight strips don't have double-sided tape installed upon them when an application calls for it, and I must purchase the tape separately. In a recent chat conversation with a customer service agent I told them if this tape wasn't applied when it was called for I would begin to consider ordering my backlight strips elsewhere. It looks like this time may have come.
I recently got a TCL 65S4 with bad backlights. After looking at the SJ listing here: https://www.shopjimmy.com/tcl-jl-d65...365as-m-led-ba...Yes0%1All backlight strips are the same quality0%1No0%0 -
Hi all, a newby question about a bridge rectifier I'm trying to identify.
I'm in the midst of reparing a battery charger in work which went pop, The bridge rectifier has shorted and took out a couple of other components. The rectifier in question has a part number KPB305G, and it looks like it's obsolete. Does any one know what I could replace it with?... -
Hello everyone,
I'm trying to fix up my battery charger. Where I found a dead schottky rectifier.
This is the dead component PTR30L120CTF:
PTR30L120CTF datasheet(1/7 Pages) PFC | 30A 120V HPTR Schottky Rectifier (alldatasheet.com)
And I have a spare 30CPQ150:
30CPQ150 datasheet(1/5 Pages) IRF | SCHOTTKY RECTIFIER (alldatasheet.com)
Can I use this diode as a replacement or if not, can you recommend me a proper replacement?
I cannot find the exact unit anywhere besides aliexpress and such.
Thank you guys!
-
This is a cap on a motherboard from 1994. “Ark” is the only brand I know of that has an A inside a rectangle, but I wanted to run it by you guys and get any thoughts on quality.
Thanks in advance.... -
For today's thread, I have a KingWin ABT-650MM ATX PSU. Official web page with the PSU specs is still up and can be found here:
http://www.rmac.kingwin.com/products.../abt_650MM.asp
I just can't help it when I see a broken / for parts PSU on eBay that's listed for cheap and looks at least somewhat interesting. Well, OK, I won't lie – on the outside, this PSU looks anything but interesting. It's a plain gray box with colorful “spaghetti cables”.
What mostly drew me into buying it is its 2x PCI-E power connectors...
Comment