ti-nspire with bad lcd screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • opamp
    Senior Member
    • Dec 2012
    • 160
    • united states
    #1

    ti-nspire with bad lcd screen

    Has anybody ever tried to fix the lcd of a calculator? is it even repairable? the reason I'm asking is because I can still see the numbers in the background were the paint came off, so I'm thinking maybe separate the lcd layers and repaint the spot??? It may sound silly but who knows. Anyways I'm thinking of replacing the screen but thought I should ask first.
    Attached Files
    Tags: None
    • Jim@HiTek
      New Member
      • Sep 2012
      • 4
      • USA
      #2
      Re: ti-nspire with bad lcd screen

      I've tried many methods of restoring LCD screens. I've never attempted to split the glass layers apart because if you do that, the liquid crystal will spread all over the glass, I think. But I have repainted the reflective silver paint on the back of some LCD assemblies.

      Btw, no method I tried ever worked so I gave up.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Ryan.man
          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
          by Ryan.man
          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
          02-04-2025, 12:23 PM
        • smic717394
          iphone XS turns off when press on screen.
          by smic717394
          Hi,

          I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
          07-25-2024, 10:16 AM
        • Chrissygizmo
          Samsung UE55JU6800K half screen dark
          by Chrissygizmo
          Hello everyone, I’ve just been given a Samsung UE55JU6800K smart tv as it had white spots on the screen due to the led lenses falling off. After refitting them & putting the tv back together I thought it was a nice easy fix for a free bedroom tv , then I tried it before screwing the back into place. I realised that the right side of the screen was darker than the other side, I removed the screen again as I thought the backlights had failed but they are fine.
          I put the screen back in place & turned it back on . The screen seemed to be ok again but different screens on the same...
          02-10-2025, 12:33 AM
        • ipatch
          ipad pro 9.7" blew a SMD component while replacing the screen 🤦‍♂️
          by ipatch
          i have an ipad pro 9.7" (1st gen) A1674 where i replaced the screen, but never attached the screen to the frame/chassis (glued down) due to the ipad being previously dropped so the new screen would never fit in the frame properly. so i need flex/bend the chassis to eventually fix the new screen in properly. so i temporarily just applied blue tape around the edges of the screen to keep it in place. when watching videos with the ipad the screen started flicker, so i though maybe the new quasi cheap amz screen i purchased was going out. so i disconnected then reconnected with power still on,...
          08-24-2024, 02:36 PM
        • FreakyMex
          Trouble to identify part (Lunii screen) for replacement
          by FreakyMex
          Hello guys. I'm a complete noob in electronics. I'd like to repair my child Lunii's (a "story box"), basically an audio player that allows the childs to choose between several options the places, characters, objects of the story, and then play a story according to the choice of the child. There is a screen that display the selected option before each choice. The Lunii fell and the screen is now broken.
          I'd like to repair it (probably just have to change the part, because the lunii still works perfectly fine) but I can't manage to identify the part/order it online. Do you have any...
          https://photos.app.goo.gl
          02-17-2025, 01:16 AM
        • Loading...
        • No more items.
        Working...