How to find out the rating of my blown thermister

[swampy]

Hi folks i've got a blown thermister but all it says is NTC 201 on the board and 054 on the green thermister.
Its from a mirage PI-190DTLB inverter power board from my zerox 22" lcd monitor which im currently fixing.

[Toasty]

Re: How to find out the rating of my blown thermister

Probably an SCK-054

SCK-054
5Ω - cold ( 25°C )
4A - continuous current
180mΩ - at max current

12mm diameter disc.

It is a thermistor, but it's actually called an Inrush Current Limiter.

http://search.digikey.com/scripts/Dk...me=317-1177-ND

Toast

[swampy]

Re: How to find out the rating of my blown thermister

Cheers for that help Toasty

[swampy]

Re: How to find out the rating of my blown thermister

would it be possible to use a
NTC 5D-09 instead of a NTC 5D-11
sck-....................... , SCK-054
5Ω - cold ( 25°C )......, 5Ω - cold ( 25°C )
3A - continuous current. 4A -continuous current
210mΩ - at max current.180mΩ - at max current

[Krankshaft]

Re: How to find out the rating of my blown thermister

No the continuous rated current is less.

That's like putting a 1/2 watt resistor where a 1 watt resistor was. It will just burn up.